A "good" problem.....any advise? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 08-29-2006, 04:29 PM

i'd just take something and wed it to the plug so you could get vise grips or pipe wrench on it// heat from the welding and the leverage should solve problem

or you could leave it in place and get a cover with a fill plug on it or install a fill plug on your present cover

LUV2XCLR8 · 08-29-2006, 04:31 PM

Quote:

Originally Posted by cdowns

i'd just take something and weld it to the plug so you could get vise grips or pipe
wrench on it// heat from the welding and the leverage should solve problem

Been there, done that, easy fix

08-29-2006, 04:29 PM	#1
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: A "good" problem.....any advise? i'd just take something and wed it to the plug so you could get vise grips or pipe wrench on it// heat from the welding and the leverage should solve problem or you could leave it in place and get a cover with a fill plug on it or install a fill plug on your present cover __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.