'72 blinkers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rodstored-72 · 08-30-2006, 10:16 AM

all,
i am trying ot connect the blinker lights in the bumper for my '72 chevy pickup. i can't figure out what the yellow wire is for & where it is supposed to connect to???

can any one give me some help!

thanks!!!
rodstored-72

72 CustomCamper · 08-30-2006, 02:53 PM

The only 2 yellow wires I can find on the diagram are a 20 gauge going from the coil to the starter and an 18 gauge going from the firewall to the left rear turnsignal. PM me your Email addy and I can send you a copy the 72 wiring diagrams that I have...

Chuck

rodstored-72 · 08-30-2006, 04:06 PM

chuck,
thanks i do have the assy. manual. i didn't check it though because the wires start @ the socket of ea. bumper light & are only about 4" long with a circle conn. at the end??? i was thiinking that they were maybe ground, but i am not sure to where & why???

thanks!!!

rodstored-72 (jake)

matthufham · 08-30-2006, 04:28 PM

yellow? it should be blue and black coming from the light, or a light blue. then a circle disconnect, but yellow?

72 CustomCamper · 08-30-2006, 07:38 PM

Quote:

Originally Posted by rodstored-72

chuck,
thanks i do have the assy. manual. i didn't check it though because the wires start @ the socket of ea. bumper light & are only about 4" long with a circle conn. at the end??? i was thiinking that they were maybe ground, but i am not sure to where & why???

thanks!!!

rodstored-72 (jake)

I have some diagrams that other members have posted in the past. I did use them to redo my harness though so I know they're right...

Chuck

rodstored-72 · 08-30-2006, 07:56 PM

yea,
i think it is an "extra" wire. i have the other two wires connected to the factory (new) wiring harness. i wanted to check with "the experts" before i cut it. i guess that from the responses that it may not be needed.
what do you guys think??

rodstored-72

08-30-2006, 10:16 AM	#1
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,985	'72 blinkers all, i am trying ot connect the blinker lights in the bumper for my '72 chevy pickup. i can't figure out what the yellow wire is for & where it is supposed to connect to??? can any one give me some help! thanks!!! rodstored-72

08-30-2006, 02:53 PM	#2
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Re: '72 blinkers The only 2 yellow wires I can find on the diagram are a 20 gauge going from the coil to the starter and an 18 gauge going from the firewall to the left rear turnsignal. PM me your Email addy and I can send you a copy the 72 wiring diagrams that I have... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

08-30-2006, 04:06 PM	#3
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,985	Re: '72 blinkers chuck, thanks i do have the assy. manual. i didn't check it though because the wires start @ the socket of ea. bumper light & are only about 4" long with a circle conn. at the end??? i was thiinking that they were maybe ground, but i am not sure to where & why??? thanks!!! rodstored-72 (jake) Last edited by rodstored-72; 08-30-2006 at 04:07 PM.

08-30-2006, 04:28 PM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: '72 blinkers yellow? it should be blue and black coming from the light, or a light blue. then a circle disconnect, but yellow?

08-30-2006, 07:56 PM	#6
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,985	Re: '72 blinkers yea, i think it is an "extra" wire. i have the other two wires connected to the factory (new) wiring harness. i wanted to check with "the experts" before i cut it. i guess that from the responses that it may not be needed. what do you guys think?? rodstored-72



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.