WTT: 67 Step side fenders for 69-72 same. N. Tx - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 07-20-2006, 04:12 PM

I need either both stepside fenders, no cutout for spare on drivers side, or I need the side marker section. My brother has a 67 he wants to put my 70 clip on. However, the bed does not have the side markers. He does not want to fill the markers on the fenders. So, I either need to swap fenders with someone, or get a set of marker sections that have been cut out so I can graft them in. Looking for straight trade for fenders, or will buy the cut outs. Fenders are in good shape.

RicksTrucks · 07-20-2006, 04:19 PM

I have a drivers side 67 with cutout for $75 if you want to use it as a patch panel. Can deliver on next trip to DFW.

RicksTrucks · 07-20-2006, 05:16 PM

Just re-read your ad and think I read it wrong the first time. Looks like you are looking for 69-72, sorry.

rauto13 · 07-21-2006, 01:00 AM

could ya use cutouts from fleetside? I am parting out a 72 fleetside & could have the cutouts cut out. I think my bodyshop would do this for me.

fade94 · 07-21-2006, 07:56 AM

Quote:

Originally Posted by rauto13

could ya use cutouts from fleetside? I am parting out a 72 fleetside & could have the cutouts cut out. I think my bodyshop would do this for me.

I don't see why not. Let me know.

**special-K** · 07-21-2006, 08:52 AM

You may want to find Stepside cut outs.The Fleetsides sit flat and Stepsides are raised at the rear due to fender contour.If I was in your area,I`d trade ya.

67ChevyRedneck · 07-21-2006, 09:36 AM

Here's a real nice set on evilbay, no too far from you?

http://cgi.ebay.com/ebaymotors/1968-...spagenameZWDVW

Then you could hock the 67 fenders on here!

RicksTrucks · 07-24-2006, 10:34 AM

That is not too far from me. I could probably get them and deliver on my next trip south for about half the shipping costs, if that would help. Let me know your eBay name so no one bids against you.

blades176 · 07-24-2006, 10:10 PM

Fade, is that the stepbed that was for sale close to Houston? I have the fenders you are needing but not sure if I want to go with the 67 just yet. Will let you know.

jsbgump · 07-24-2006, 10:21 PM

I will check on a bed I have acess to tomorrow and see what shape they are in. I can't remember if it had the spare tire cut out or not but will let you know tomorrow

fade94 · 07-25-2006, 08:09 AM

Quote:

Originally Posted by blades176

Fade, is that the stepbed that was for sale close to Houston? I have the fenders you are needing but not sure if I want to go with the 67 just yet. Will let you know.

No. I picked this one up in Copeville, TX. I talked to the guy about it mid 05' and he was too high on it. He then had an auction and it didn't sell. (he didn't let anybody know about the auction

) When I saw it sitting outside again, I stopped and got it for $200 less than he was asking.

jsbgump · 07-25-2006, 08:28 PM

The driver side one is pretty rough. The pass side is in good shape. I am trying to get ahold of my buddy that has this so I can get some better pics

fade94 · 07-25-2006, 09:18 PM

Sale or trade? Spare cut out? If they are too bad, I would be interested in just the cut out.
Let me know.

jsbgump · 07-26-2006, 10:05 PM

It was actually the pass side that was rough. The first two pics show the dings. The driver side is pretty nice.Would trade if your interested. Pm me for further talks.

jsbgump · 07-28-2006, 09:25 AM

Some more pics

smbrouss70 · 08-31-2006, 02:56 PM

Did you ever find what you are looking for, fade94? I have some cutouts off of a 70 step.

07-20-2006, 04:12 PM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	WTT: 67 Step side fenders for 69-72 same. N. Tx I need either both stepside fenders, no cutout for spare on drivers side, or I need the side marker section. My brother has a 67 he wants to put my 70 clip on. However, the bed does not have the side markers. He does not want to fill the markers on the fenders. So, I either need to swap fenders with someone, or get a set of marker sections that have been cut out so I can graft them in. Looking for straight trade for fenders, or will buy the cut outs. Fenders are in good shape. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-20-2006, 04:19 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx I have a drivers side 67 with cutout for $75 if you want to use it as a patch panel. Can deliver on next trip to DFW. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-20-2006, 05:16 PM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Just re-read your ad and think I read it wrong the first time. Looks like you are looking for 69-72, sorry. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-21-2006, 01:00 AM	#4
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx could ya use cutouts from fleetside? I am parting out a 72 fleetside & could have the cutouts cut out. I think my bodyshop would do this for me. __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

07-21-2006, 08:52 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx You may want to find Stepside cut outs.The Fleetsides sit flat and Stepsides are raised at the rear due to fender contour.If I was in your area,I`d trade ya. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2006, 09:36 AM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Here's a real nice set on evilbay, no too far from you? http://cgi.ebay.com/ebaymotors/1968-...spagenameZWDVW Then you could hock the 67 fenders on here! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-24-2006, 10:34 AM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx That is not too far from me. I could probably get them and deliver on my next trip south for about half the shipping costs, if that would help. Let me know your eBay name so no one bids against you. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-24-2006, 10:10 PM	#9
blades176 Registered User Join Date: Mar 2006 Location: Irving, Texas Posts: 27	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Fade, is that the stepbed that was for sale close to Houston? I have the fenders you are needing but not sure if I want to go with the 67 just yet. Will let you know.

07-24-2006, 10:21 PM	#10
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx I will check on a bed I have acess to tomorrow and see what shape they are in. I can't remember if it had the spare tire cut out or not but will let you know tomorrow __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

07-25-2006, 08:28 PM	#12
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx The driver side one is pretty rough. The pass side is in good shape. I am trying to get ahold of my buddy that has this so I can get some better pics __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

07-25-2006, 09:18 PM	#13
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Sale or trade? Spare cut out? If they are too bad, I would be interested in just the cut out. Let me know. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-26-2006, 10:05 PM	#14
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx It was actually the pass side that was rough. The first two pics show the dings. The driver side is pretty nice.Would trade if your interested. Pm me for further talks. Attached Images __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 Last edited by jsbgump; 07-26-2006 at 10:06 PM.

07-28-2006, 09:25 AM	#15
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Some more pics Attached Images __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-31-2006, 02:56 PM	#16
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: WTT: 67 Step side fenders for 69-72 same. N. Tx Did you ever find what you are looking for, fade94? I have some cutouts off of a 70 step. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.