what vendors are at fall carlisle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c-1072 · 09-01-2006, 06:14 PM

looking to buy some parts for my 72 i was wondering what if any venders will be at fall carlisle. what sort of inventory do they bring ? i am thinking of replacing my swb bed sides instead of sandblasting and repairing and then painting just for the sake of time .I also need interior stuff .sorry if it sounds like a dumb question but it has been 6 years since i was there last .

msgross · 09-01-2006, 08:47 PM

I think that truck and car shop will be there. Might want to contact them and see what they are bringing first. http://www.truckandcarshop.com/

Good luck

70GMCer · 09-02-2006, 07:38 AM

I get most of my things from The Car and Truck Shop. Problem with them, is they never have a good inventory of things at shows. I end up either having them ship the stuff, or buy from another vendor at the show. According to them, they will be there. Would like to also know if other vendors will make it....

cdowns · 09-02-2006, 08:41 AM

the thing you have to keep in mind is space vendors pay dearly for it why bring 2bedsides with a profit of maybe $100 where that amt of space can be taken up with lots of small items with a profit expectation of over $1000// thats the real world reality of swapmeets

**special-K** · 09-02-2006, 09:48 AM

The big guys are on the road from a chain of shows.For instance,Charlotte is before Carlisle and you`ll hear,"I sold the last one at Charlotte."You could,possibly,contact them to pre-arrange a parts purchase if it`s not too late.You would have to pay in advance,I`m sure.They wouldn`t want to lug a part they could have sold ten times just to have you not show.Just take your chances and go.There is so much there,it`s crazyThere are Goodmark dealers everywhere and they go there.Large items like that are good for shows to save on shipping.The more local vendors will bring bedsides if they`re smart.
BTW,bring your`s down.I`ll buy them if they`re decent.
Jerry Brown from TheTruckShop(the original one),WentzTruckParts,Classic Industries,C.A.R.S.,Harmon`s,and dozens more set up there.

msgross · 09-02-2006, 05:00 PM

GMC Paul said that he couldn't make it. They don't give out a lot of spots for Fall Carlisle to one vendor and he stated that he needed more room. I wanted to buy a poly tank from him too, guess I'll have to have him ship it.

Sweet72 · 09-02-2006, 05:22 PM

I have seen Bill Athey (Athey's Classic Truck Parts) there in past years, not sure if he'll be there this fall though...Bill?

xshadow · 09-03-2006, 03:21 AM

I'm looking for long fleetside bedsides....ie the passenger side. Do you know of any vendors or anyone that may sell it or them to me at carlisle?

Sweet72 · 09-03-2006, 08:49 AM

You're looking for used parts right? I'll bet someone there will have bedsides and fenders stacked up. I don't remember not seeing those parts at a spring or fall show. The no name swap meet guys sell them. Big name vendors sell new repo bedsides. Brace yourself though as they may want more (for a rusty use piece) than you're willing to pay. On the other hand if you can hold out till the last day, they'd rather get rid of it than take it back home.

c-1072 · 09-04-2006, 07:55 PM

special k youve got the right idea i was hoping to save myself the shipping . my bed sides need some work and i dont feel like filling the 40 or so holes in the sides for the body molding i wont be using . i was just wanting to save time . i need to comvert my steel floor to wood so i will need a front bed panel and rear croos member . so it makes more sence to me to buy new than strugle with my old stuff even if i get stuck with my old shortbed wich isnt such a bad thing . I also need a complete interior and other small stuff . i was just hoping to find out what venders would be there and if hopefully one or two from the board might chime in to say they will be there i could get a price and even pre pay if need be .

msgross · 09-04-2006, 08:04 PM

someone has a SWB bedside for sale in the classified section, and they state they will bring it to Carlisle! good luck...

c-1072 · 09-04-2006, 09:02 PM

yes i know him (nice guy) thanks though .my bed is in better shape i still would want new or pretty close to mint . i want to avoid patching up the body i am getting impatient . i want to finsh this thing so i can start my blazer

plus after four years i think its time i finsh it .

**special-K** · 09-05-2006, 08:18 AM

As far as space goes at Carlisle.You can have all the spaces you want,but they`re all taken.It`s rare for even one spot to go back to the promoter.Guy`s just sublet them or sell them under the table.It`s been this way for years.

09-01-2006, 06:14 PM	#1
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	what vendors are at fall carlisle looking to buy some parts for my 72 i was wondering what if any venders will be at fall carlisle. what sort of inventory do they bring ? i am thinking of replacing my swb bed sides instead of sandblasting and repairing and then painting just for the sake of time .I also need interior stuff .sorry if it sounds like a dumb question but it has been 6 years since i was there last .

09-01-2006, 08:47 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: what are at venders at fall carlisle I think that truck and car shop will be there. Might want to contact them and see what they are bringing first. http://www.truckandcarshop.com/ Good luck

09-02-2006, 07:38 AM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: what vendors are at fall carlisle I get most of my things from The Car and Truck Shop. Problem with them, is they never have a good inventory of things at shows. I end up either having them ship the stuff, or buy from another vendor at the show. According to them, they will be there. Would like to also know if other vendors will make it.... __________________ 1997 GMC Sierra Ext 1965 Mustang

09-02-2006, 08:41 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: what vendors are at fall carlisle the thing you have to keep in mind is space vendors pay dearly for it why bring 2bedsides with a profit of maybe $100 where that amt of space can be taken up with lots of small items with a profit expectation of over $1000// thats the real world reality of swapmeets __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-02-2006, 09:48 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: what vendors are at fall carlisle The big guys are on the road from a chain of shows.For instance,Charlotte is before Carlisle and you`ll hear,"I sold the last one at Charlotte."You could,possibly,contact them to pre-arrange a parts purchase if it`s not too late.You would have to pay in advance,I`m sure.They wouldn`t want to lug a part they could have sold ten times just to have you not show.Just take your chances and go.There is so much there,it`s crazyThere are Goodmark dealers everywhere and they go there.Large items like that are good for shows to save on shipping.The more local vendors will bring bedsides if they`re smart. BTW,bring your`s down.I`ll buy them if they`re decent. Jerry Brown from TheTruckShop(the original one),WentzTruckParts,Classic Industries,C.A.R.S.,Harmon`s,and dozens more set up there. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-02-2006, 05:00 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: what vendors are at fall carlisle GMC Paul said that he couldn't make it. They don't give out a lot of spots for Fall Carlisle to one vendor and he stated that he needed more room. I wanted to buy a poly tank from him too, guess I'll have to have him ship it.

09-02-2006, 05:22 PM	#7
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: what vendors are at fall carlisle I have seen Bill Athey (Athey's Classic Truck Parts) there in past years, not sure if he'll be there this fall though...Bill? __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

09-03-2006, 03:21 AM	#8
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: what vendors are at fall carlisle I'm looking for long fleetside bedsides....ie the passenger side. Do you know of any vendors or anyone that may sell it or them to me at carlisle?

09-03-2006, 08:49 AM	#9
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: what vendors are at fall carlisle You're looking for used parts right? I'll bet someone there will have bedsides and fenders stacked up. I don't remember not seeing those parts at a spring or fall show. The no name swap meet guys sell them. Big name vendors sell new repo bedsides. Brace yourself though as they may want more (for a rusty use piece) than you're willing to pay. On the other hand if you can hold out till the last day, they'd rather get rid of it than take it back home. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

09-04-2006, 07:55 PM	#10
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Re: what vendors are at fall carlisle special k youve got the right idea i was hoping to save myself the shipping . my bed sides need some work and i dont feel like filling the 40 or so holes in the sides for the body molding i wont be using . i was just wanting to save time . i need to comvert my steel floor to wood so i will need a front bed panel and rear croos member . so it makes more sence to me to buy new than strugle with my old stuff even if i get stuck with my old shortbed wich isnt such a bad thing . I also need a complete interior and other small stuff . i was just hoping to find out what venders would be there and if hopefully one or two from the board might chime in to say they will be there i could get a price and even pre pay if need be .

09-04-2006, 08:04 PM	#11
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: what vendors are at fall carlisle someone has a SWB bedside for sale in the classified section, and they state they will bring it to Carlisle! good luck...

09-04-2006, 09:02 PM	#12
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Re: what vendors are at fall carlisle yes i know him (nice guy) thanks though .my bed is in better shape i still would want new or pretty close to mint . i want to avoid patching up the body i am getting impatient . i want to finsh this thing so i can start my blazer plus after four years i think its time i finsh it .

09-05-2006, 08:18 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: what vendors are at fall carlisle As far as space goes at Carlisle.You can have all the spaces you want,but they`re all taken.It`s rare for even one spot to go back to the promoter.Guy`s just sublet them or sell them under the table.It`s been this way for years. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.