Front dress for a BBC conversion? Make a ZZ502 look "OEM"?

[dwaite72lnghrn]

I have since converted to serp setup. I went with the factory setup because it came with all of the acc. which are new or remanf parts. The only problem I have is it is real close to the rad so the OEM shroud will not work. I am running 2 fan in front a 14" and a 10". I am hammering out a new shroud to fit just have to git r dun.
I added the serp pictures. I figured it wasn't factory so I left it black. The serp setup came with the 105amp alt, new power steering pump AC comp, and water pump. I could have gone Scrap yard but then I have ??? age and condition on a new engine. Figure where to put the electric fuel pump and Change the trans mount when you do it or the first month it will be gone along with the carrier bearing. I went with the HT502 because I tow with the truck and the best range to run is 2400-3200rpm(45mph-68mph) with the 4.10 and 30" tires. The ZZ502 is going to want to run at about 3600-5000rpm. So Stall is in order for it.