So, you get anything done this weekend? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

meathead95 · 09-12-2006, 04:08 PM

who ended up doing your headers brian? what did it cost you and how is the quality? got a pic?

5150 · 09-12-2006, 04:29 PM

The AMR Coatings over in Knoxville. They ran $195 to get done. I'll get a pic this Saturday at the car show I'll have it in.

uk72step · 09-12-2006, 05:27 PM

Yip,
After a 3 month hiatus....(moved house)
pulled the cab off the chassis on Saturday Afternoon, stripped the bed.
Last night after work pulled the motor, transmission and propshaft.

I have next week off work so plan is to strip down to bare frame rails and get the frame blasted and primed ready for some two pack...

Finally some progress....

Cheers
Lee

Southedisto · 09-12-2006, 05:34 PM

Pulled mine out of the garage, cleaned the garage. Finished cleaning the frame rails, rust convertered them, cut off my shock mounts, started it up made sure the tranny still worked. Found out I have zero, nada, 0, no, and I mean NO brakes, when does it end. But I did get one of my seats back!

CochinoFilipino · 09-12-2006, 05:40 PM

I put my mustang on dolleys so I can push it around the carport (no garage

) when I work on it and all the way to the wall when I'm done.

**Boog** · 09-12-2006, 08:11 PM

Well I got the starter mounted, driveshaft in, valve covers primed n painted, radiator and core support back on. Getting closer to firing the new engine up. Started sorting the under hood wiring harness out. 6 cyl harness, going with V8. I know, get a new one.

70 net440 · 09-12-2006, 10:48 PM

Got my youngest son's '71 4X4 running after 14 years of sitting. Rebuilt the carb, new fuel pump, new power steering pump, belts, hoses, and a nearly new 4 core rad. it fired right up, idled well and hardly smoked at all. Now the real work begins, brakes, interior, lift kit, cab mounts, rocker panel.....

jhwkns · 09-13-2006, 12:11 AM

I replaced my worn steering gearbox, and rotated the rubber.

409biscayne · 09-13-2006, 12:34 PM

Loaded the 64 Biscayne on the trailer and took it to the muffler man and had a set of Flowmasters installed , it hasn't been off the property for 5 years , so cleaned the shop while it was gone . The neighbors seem a little happier now that it has mufflers , lol , funny it doesn't sound much quieter in the car . Also while it was on the trailer i weighed it at the local Cenex dealer , 2800 lbs with no hood or frt bumper or interior , hoping to lose another 100 lbs when i switch the Cragar ss to Super Tricks , maybe . I am so pumped , i may make a run down the strip , still 4 weekends left before they close down for winter . Not 67 - 72 stuff , but it's what i did .
Later ............................................. 409 .

09-12-2006, 04:08 PM	#26
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: So, you get anything done this weekend? who ended up doing your headers brian? what did it cost you and how is the quality? got a pic? __________________ 72 2wd blazer 72 swb 4x4

09-12-2006, 04:29 PM	#27
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: So, you get anything done this weekend? The AMR Coatings over in Knoxville. They ran $195 to get done. I'll get a pic this Saturday at the car show I'll have it in. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-12-2006, 05:27 PM	#28
uk72step outta the car velocityboy Join Date: Nov 2004 Location: Scotland Posts: 112	Re: So, you get anything done this weekend? Yip, After a 3 month hiatus....(moved house) pulled the cab off the chassis on Saturday Afternoon, stripped the bed. Last night after work pulled the motor, transmission and propshaft. I have next week off work so plan is to strip down to bare frame rails and get the frame blasted and primed ready for some two pack... Finally some progress.... Cheers Lee __________________ ..give it a turn here, take some wedge out there, we'll win some races...

09-12-2006, 05:34 PM	#29
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: So, you get anything done this weekend? Pulled mine out of the garage, cleaned the garage. Finished cleaning the frame rails, rust convertered them, cut off my shock mounts, started it up made sure the tranny still worked. Found out I have zero, nada, 0, no, and I mean NO brakes, when does it end. But I did get one of my seats back! Attached Images __________________ I like wheelin in Dixie! Last edited by Southedisto; 09-12-2006 at 05:34 PM.

09-12-2006, 05:40 PM	#30
CochinoFilipino Registered User Join Date: Feb 2006 Location: Republic of California Posts: 345	Re: So, you get anything done this weekend? I put my mustang on dolleys so I can push it around the carport (no garage ) when I work on it and all the way to the wall when I'm done. __________________ '67 C10 Short Stepside 5.0TPI/700R4

09-12-2006, 08:11 PM	#31
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,535	Re: So, you get anything done this weekend? Well I got the starter mounted, driveshaft in, valve covers primed n painted, radiator and core support back on. Getting closer to firing the new engine up. Started sorting the under hood wiring harness out. 6 cyl harness, going with V8. I know, get a new one. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

09-12-2006, 10:48 PM	#32
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: So, you get anything done this weekend? Got my youngest son's '71 4X4 running after 14 years of sitting. Rebuilt the carb, new fuel pump, new power steering pump, belts, hoses, and a nearly new 4 core rad. it fired right up, idled well and hardly smoked at all. Now the real work begins, brakes, interior, lift kit, cab mounts, rocker panel..... __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

09-13-2006, 12:11 AM	#33
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: So, you get anything done this weekend? I replaced my worn steering gearbox, and rotated the rubber. __________________ I intend to live forever. So far, so good.

09-13-2006, 12:34 PM	#34
409biscayne Senior Member Join Date: Nov 2005 Location: Spokane , Wash. Posts: 790	Re: So, you get anything done this weekend? Loaded the 64 Biscayne on the trailer and took it to the muffler man and had a set of Flowmasters installed , it hasn't been off the property for 5 years , so cleaned the shop while it was gone . The neighbors seem a little happier now that it has mufflers , lol , funny it doesn't sound much quieter in the car . Also while it was on the trailer i weighed it at the local Cenex dealer , 2800 lbs with no hood or frt bumper or interior , hoping to lose another 100 lbs when i switch the Cragar ss to Super Tricks , maybe . I am so pumped , i may make a run down the strip , still 4 weekends left before they close down for winter . Not 67 - 72 stuff , but it's what i did . Later ............................................. 409 . __________________ Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.