Cab mount torque specs needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CPNE** · 09-15-2006, 08:22 PM

What are the torque specifications for front and rear cab mounts on a 1/2 ton 2wd pickup?

CPNEJR · 09-15-2006, 09:02 PM

ttt

mudpuppie · 09-15-2006, 09:09 PM

just about a 1/4 of a turn befor bolts break or the nuts strip out .... sorry i dont know.....

JimKshortstep4x4 · 09-15-2006, 09:20 PM

My service manual lists the torque specs as follows: Front mounts, (#2 position) 50 lb./ft.

Rear mounts 20 lb./ft.

Jim

09-15-2006, 08:22 PM	#1
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Cab mount torque specs needed What are the torque specifications for front and rear cab mounts on a 1/2 ton 2wd pickup? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-15-2006, 09:09 PM	#3
mudpuppie Registered User Join Date: Nov 2005 Location: Virginia Posts: 51	Re: Cab mount torque specs needed just about a 1/4 of a turn befor bolts break or the nuts strip out .... sorry i dont know..... Last edited by mudpuppie; 09-15-2006 at 09:09 PM.

09-15-2006, 09:20 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Cab mount torque specs needed My service manual lists the torque specs as follows: Front mounts, (#2 position) 50 lb./ft. Rear mounts 20 lb./ft. Jim

09-15-2006, 09:02 PM	#2
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: Cab mount torque specs needed ttt __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)



Register or Log In To remove these advertisements.