71 Brake rotor removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70 net440 · 09-26-2006, 09:20 PM

I seem to have misplaced the knowledge I had for removing the front rotors on my son's 71 K10. I have removed the hub, inner and outer snap rings, and lock nut. What am I missing? Are there any special tools I need besides the four tanged socket for the locknut? Thanks in advance for any replies.

**kwmech** · 09-26-2006, 10:06 PM

The washer between the two nuts and the final nut, it should pull off unless the bearings are slightly stuck.

70 net440 · 09-26-2006, 11:15 PM

I thought that washer should come out of there. It didn't want to pop loose with a hook scribe. I'll try again tommorrow. Thanks.

09-26-2006, 09:20 PM	#1
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	71 Brake rotor removal I seem to have misplaced the knowledge I had for removing the front rotors on my son's 71 K10. I have removed the hub, inner and outer snap rings, and lock nut. What am I missing? Are there any special tools I need besides the four tanged socket for the locknut? Thanks in advance for any replies. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

09-26-2006, 10:06 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,649	Re: 71 Brake rotor removal The washer between the two nuts and the final nut, it should pull off unless the bearings are slightly stuck.

09-26-2006, 11:15 PM	#3
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: 71 Brake rotor removal I thought that washer should come out of there. It didn't want to pop loose with a hook scribe. I'll try again tommorrow. Thanks. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.