axel gears? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 10-21-2002, 05:05 PM

i have a 4.10 rear 10 bolt stock rear. my truck is a 3/4 ton im tryin to figure out if its posi what do you think is it also its a 70 gmc 2wd

special70gmc · 10-21-2002, 09:24 PM

c mon i know some one can help me?

but i also wanna know whats the best gers for some hwy mosly around town? 3.56?

crazy longhorn · 10-21-2002, 10:06 PM

Unless you go aftermarket, 4.10 is about as good as it gets on the corporate rear diff. I think some of the guys were talking about 3.90 & possibly a 3.73 ratio available.....but expensive. You could look around for a dana 60 with a 3.54 ratio, & swap it in to get a better all around gear. as far as posi unit, try jacking up the rear, & turn 1 wheel.....if the other turns the same direction, its posi.....if it turns backward, then its open. Hope that helps ....crazy AL

Fred T · 10-21-2002, 10:19 PM

Crazy Al's right about limited options on improving your rear gears. Randy's Ring & Pinion www.ring-pinion.com makes a set of 3.90 gears, but your pockets will be empty

. The best way to regear a 3/4 ton is to get a 14 bolt from salvage. Full floaters are readily available with 3.73 gears, a local yard told me that you can now get 3.42 gears, too. Someone else here said the 3.42 are only semi-floaters, so I'm not sure.

10-21-2002, 05:05 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	axel gears? i have a 4.10 rear 10 bolt stock rear. my truck is a 3/4 ton im tryin to figure out if its posi what do you think is it also its a 70 gmc 2wd __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

10-21-2002, 09:24 PM	#2
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	c mon i know some one can help me? but i also wanna know whats the best gers for some hwy mosly around town? 3.56? __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

10-21-2002, 10:19 PM	#4
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Crazy Al's right about limited options on improving your rear gears. Randy's Ring & Pinion www.ring-pinion.com makes a set of 3.90 gears, but your pockets will be empty . The best way to regear a 3/4 ton is to get a 14 bolt from salvage. Full floaters are readily available with 3.73 gears, a local yard told me that you can now get 3.42 gears, too. Someone else here said the 3.42 are only semi-floaters, so I'm not sure. __________________ Fred There is no such thing as too much cam...just not enough engine.

10-21-2002, 10:06 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Unless you go aftermarket, 4.10 is about as good as it gets on the corporate rear diff. I think some of the guys were talking about 3.90 & possibly a 3.73 ratio available.....but expensive. You could look around for a dana 60 with a 3.54 ratio, & swap it in to get a better all around gear. as far as posi unit, try jacking up the rear, & turn 1 wheel.....if the other turns the same direction, its posi.....if it turns backward, then its open. Hope that helps ....crazy AL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.