|
10-11-2006, 06:30 PM
|
#1 |
|
New Member
Join Date: Sep 2006
Location: texas
Posts: 118
|
73 spindles on 72
hey guys i was wondering i have a set of spindles that were made for a 73 but if i use them on my 72 someone told me that all i have to change are the outer ty rod ends,true or false.and also why do some people say its dangerous to run 3 inch drop springs in the front,thanks for the help
|
|
|
|
10-11-2006, 09:15 PM
|
#2 |
|
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: 73 spindles on 72
Yes you need a differnet outter tie rod end and a different adjusting sleeve. You also need to change 1 of the ball joints out, sorry forget which one upper or lower.
Aaron |
|
|
|
|
10-11-2006, 09:23 PM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: 73 spindles on 72
On a 1/2 ton truck, swap the upper ball joints & the outer tierod ends ...you should be good to go. I dont remember any issues with the sleeves, but on the 67-70, the sleeves are different IIRC....
 L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
10-11-2006, 09:25 PM
|
#4 |
|
Senior Member
Join Date: Nov 2003
Location: Calgary Alberta
Posts: 1,936
|
Re: 73 spindles on 72
upper. inch lowered springs change all of the angles, and the amount of travel. Lots of guys run them with lowered spindles to give you 5-6 inch of drop
__________________
67- 72 Parts collecter |
|
|
|
|
10-11-2006, 09:30 PM
|
#5 |
|
New Member
Join Date: Sep 2006
Location: texas
Posts: 118
|
Re: 73 spindles on 72
but is it dangerous
|
|
|
|
|
10-11-2006, 09:41 PM
|
#6 |
|
sufficiently talented fool
 
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: 73 spindles on 72
I have 3 inch drop springs on mine, and it does fine driving up the road, but at slow speed it does not like very large bumps.
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
|
|
|
|
10-11-2006, 11:19 PM
|
#7 |
|
Account Suspended
Join Date: Aug 2006
Location: vacaville ca, because it as far from indy as i can be
Posts: 777
|
Re: 73 spindles on 72
trkklr77- as you know, there have been some rule changes within the past few months. In order to post for sale and want to but ads, you must be a subscriber. anyone may purchase from you however. By subscribing you get alot of new features, Ability to post Ads in the classified forums, Extra PM storage space, Bold Blue name, and A larger avatar. You can subscribe one of the following ways;
Using PayPal via subscription http://67-72chevytrucks.com/vboard/payments.php or snail mail with a check/money order Joshua Brady PO BOX 7411 Midland, TX 79708-7411 Please include your board name on the payment. Last edited by N2TRUX; 10-12-2006 at 08:42 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
