Leak is driving me nuts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RSRXION · 10-23-2006, 10:37 PM

Make sure you've got the round gasket beneath the distributor base. In addition, are you using a PCV valve ? If you are running an engine that has some wear and creates positive internal pressure, the absence of a vent ( positive crankcase ventiliation PCV valve ) will cause the engine to leak at it's weakest point. Usually around the manifold or oil pan. JMHO, Dean

underdog8704 · 10-24-2006, 02:02 PM

Quote:

Originally Posted by RSRXION

In addition, are you using a PCV valve ? If you are running an engine that has some wear and creates positive internal pressure, the absence of a vent ( positive crankcase ventiliation PCV valve ) will cause the engine to leak at it's weakest point. Usually around the manifold or oil pan. JMHO, Dean

ya, i am already running a pcv valve. thanks again guys for all the input.

10-23-2006, 10:37 PM	#1
RSRXION Senior Member Join Date: Jun 2006 Location: Arkansas Posts: 227	Re: Leak is driving me nuts! Make sure you've got the round gasket beneath the distributor base. In addition, are you using a PCV valve ? If you are running an engine that has some wear and creates positive internal pressure, the absence of a vent ( positive crankcase ventiliation PCV valve ) will cause the engine to leak at it's weakest point. Usually around the manifold or oil pan. JMHO, Dean __________________ "They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Ben Franklin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.