Tach/Vac/Speedwarning for restoration $400 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71swb4x4 · 11-02-2006, 11:38 PM

Here is a tach/vac/speedwarning. The needles have been repainted. I bought new overlays for the faces from a board member, they still need to be put on. I will also include an original factory tach harness. The inside tin is not an original tach/vac tin. I couldn't find one when I was putting this back together so I cut two apart to make this one. If you put it back together and look close you could tell, but most people couldn't. When it's in the truck I can't tell. If you want it to be correct you will need to find a new inner tin. I put this whole thing together from a few clusters. It comes with a factory metal oil pressure line too.

NOS parts included:
speedwarning buzzer
speedwarning knob
speedwarning cable nut

new parts included:
bezel
tach printed circuit
speedwarning harness
overlays for faces - speedometer, tach, gas gauge, temp, battery, vacuum, oil pressure

parts needed:
speedwarning cable - The cable that comes with is not original and would take some modification to make work.

SOLD

71swb4x4 · 11-02-2006, 11:40 PM

The new bezel isn't pictured but I do have a new bezel for it. The speedwarning knob hole isn't drilled yet.

PT'S 70 CST · 11-03-2006, 10:58 AM

PM sent

PT

Bob Moore · 11-03-2006, 03:04 PM

Put me 2nd in line after PT.

Thanks - Bob

Bob Moore · 11-05-2006, 12:45 AM

Pay Pal? PM me an e-mail address.

Thanks - Bob

11-02-2006, 11:38 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Tach/Vac/Speedwarning for restoration $400 shipped Here is a tach/vac/speedwarning. The needles have been repainted. I bought new overlays for the faces from a board member, they still need to be put on. I will also include an original factory tach harness. The inside tin is not an original tach/vac tin. I couldn't find one when I was putting this back together so I cut two apart to make this one. If you put it back together and look close you could tell, but most people couldn't. When it's in the truck I can't tell. If you want it to be correct you will need to find a new inner tin. I put this whole thing together from a few clusters. It comes with a factory metal oil pressure line too. NOS parts included: speedwarning buzzer speedwarning knob speedwarning cable nut new parts included: bezel tach printed circuit speedwarning harness overlays for faces - speedometer, tach, gas gauge, temp, battery, vacuum, oil pressure parts needed: speedwarning cable - The cable that comes with is not original and would take some modification to make work. SOLD Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 11-09-2006 at 11:35 PM.

11-02-2006, 11:40 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Tach/Vac/Speedwarning for restoration $400 shipped The new bezel isn't pictured but I do have a new bezel for it. The speedwarning knob hole isn't drilled yet. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-03-2006, 10:58 AM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Tach/Vac/Speedwarning for restoration $400 shipped PM sent PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

11-03-2006, 03:04 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Tach/Vac/Speedwarning for restoration $400 shipped Put me 2nd in line after PT. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

11-05-2006, 12:45 AM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Tach/Vac/Speedwarning for restoration $400 shipped Pay Pal? PM me an e-mail address. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.