Newbie from Utah - The 1947 - Present Chevrolet & GMC Truck Message Board Network

timcos · 08-13-2006, 11:26 PM

OK folks.

My 17 yo son totaled my Mitsubishi last week. I was teaching him how to drive and he overshot a U-turn and sort of turned it into a Q-turn.

Because it is only worth about 4K the insurance company will total it because it will take 5K to fix.

OK...2.5 years ago I had to sell my 1971 longbed fleetside red and white C10. Broke my heart but I got laid off...so what does one do?

Since I discovered that my Mitsu was going to be totaled...my mind started wandering...where is my next 71 or 72 truck.

I found it. Bought it Saturday.

It is one-owner 1972 4x4 C10 Cheyenne fleetside shortbed p/s, p/b, a/c, and never wrecked. It has a Dayton winch on the front. It is 1/2 ton.

It was a fellow's hunting truck for over 32 years. He passed on two years ago and his dear wife could not part with the truck. The kids have finally convinced her to let it go. I have to figure it was hard because they were married for over 50 years.

Well, with due respect to this fine gentleman and his family...I am now the second owner of a 34 year old truck. It is in pretty decent shape. A bit of rust where you would figure...bottom of doors and back bottom of cab mostly.

Heck I was so tickled that it even ran I am beside myself. The engine was rebuilt 18 years ago. It is in dire need of a tune up and an a/c recharge and some TLC.

It was that light olive green originally...he saw a truck painted dark grey over white so he had the outside painted that color. The interior of the cab is still green.

Funny thing though...the bed area has two propane tanks that he used in the late 70's to run the engine on either gas or propane. I am not sure if it still works...but heck it may be cheaper to run it on propane...anyone here know about that?

I am going to bring it back to glory over the next two years...maybe a bit shorter. I am going to go through all the mechanicals and make sure it is sound and solid.

Wow...are my juices flowing. Something about the 67-72 that really floats my boat.

I am sure I will be asking about parts and quality and suppliers. I would love to actually get rid of the propane set up and build a new bed with all new parts and a white oak planking. There is a little cancer around the wheel wells and two opening cut in with doors on either side of the bed for the propane refilling ports. I would imagine all new parts are available.

Anyway....that is long winded enough now.

Cheers,

Tim

*bskylerj* · 08-14-2006, 12:08 AM

Welcome from Washington State. Where's the pics?

krue · 08-14-2006, 01:08 AM

Welcome to the board from South Mississippi!

**Canadian694x4** · 08-14-2006, 01:14 AM

To The Boards From The Great White North!

jsbgump · 08-14-2006, 04:39 PM

Welcome to the board

*Kesmai* · 08-14-2006, 05:42 PM

helllo im kesmai im newbie too

CAL 58 GMC · 08-14-2006, 06:45 PM

Welcome!! Sounds like a great find!

LUV2XCLR8 · 08-15-2006, 09:51 PM

From West TN

***Liz*** · 08-18-2006, 09:14 PM

Welcome to the site Tim. Im sorry about your sons wreck, hope everyone was ok... but congrats on the truck

86swb · 08-19-2006, 10:01 AM

Yes, sounds like a good find. We love pictures here so lets get a look at the truck. Welcome to the board from Western Kentucky.

timcos · 08-28-2006, 01:13 AM

OK...here is my new beast

oj70chevy · 08-29-2006, 08:46 AM

and

from San Antonio, Texas. Nice truck!

71SWBChevy · 08-29-2006, 05:27 PM

to the board from KY!!!!

timcos · 09-03-2006, 09:06 PM

Are there many board members from Utah?

Tim

**Palf70Step** · 10-02-2006, 05:16 AM

Truck looks real good. Always good to get back into the drivers seat of one.

**BOSS** · 10-02-2006, 11:12 AM

Looks like a great truck you found there

shaneschevys · 10-11-2006, 10:51 AM

Welcome from FT Worth TX.

**Ron 586** · 11-04-2006, 12:11 PM

Welcome from West Tennessee.

ProStreet83C10 · 11-05-2006, 02:15 PM

gotta love the gun rack!!

08-13-2006, 11:26 PM	#1
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Newbie from Utah OK folks. My 17 yo son totaled my Mitsubishi last week. I was teaching him how to drive and he overshot a U-turn and sort of turned it into a Q-turn. Because it is only worth about 4K the insurance company will total it because it will take 5K to fix. OK...2.5 years ago I had to sell my 1971 longbed fleetside red and white C10. Broke my heart but I got laid off...so what does one do? Since I discovered that my Mitsu was going to be totaled...my mind started wandering...where is my next 71 or 72 truck. I found it. Bought it Saturday. It is one-owner 1972 4x4 C10 Cheyenne fleetside shortbed p/s, p/b, a/c, and never wrecked. It has a Dayton winch on the front. It is 1/2 ton. It was a fellow's hunting truck for over 32 years. He passed on two years ago and his dear wife could not part with the truck. The kids have finally convinced her to let it go. I have to figure it was hard because they were married for over 50 years. Well, with due respect to this fine gentleman and his family...I am now the second owner of a 34 year old truck. It is in pretty decent shape. A bit of rust where you would figure...bottom of doors and back bottom of cab mostly. Heck I was so tickled that it even ran I am beside myself. The engine was rebuilt 18 years ago. It is in dire need of a tune up and an a/c recharge and some TLC. It was that light olive green originally...he saw a truck painted dark grey over white so he had the outside painted that color. The interior of the cab is still green. Funny thing though...the bed area has two propane tanks that he used in the late 70's to run the engine on either gas or propane. I am not sure if it still works...but heck it may be cheaper to run it on propane...anyone here know about that? I am going to bring it back to glory over the next two years...maybe a bit shorter. I am going to go through all the mechanicals and make sure it is sound and solid. Wow...are my juices flowing. Something about the 67-72 that really floats my boat. I am sure I will be asking about parts and quality and suppliers. I would love to actually get rid of the propane set up and build a new bed with all new parts and a white oak planking. There is a little cancer around the wheel wells and two opening cut in with doors on either side of the bed for the propane refilling ports. I would imagine all new parts are available. Anyway....that is long winded enough now. Cheers, Tim Last edited by timcos; 10-02-2006 at 12:42 PM.

08-14-2006, 12:08 AM	#2
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Newbie from Utah Welcome from Washington State. Where's the pics?

08-14-2006, 01:08 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Newbie from Utah Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-14-2006, 01:14 AM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Newbie from Utah To The Boards From The Great White North! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

08-14-2006, 04:39 PM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Newbie from Utah Welcome to the board __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-14-2006, 05:42 PM	#6
Kesmai Account Suspended Join Date: Aug 2006 Location: Boston Posts: 13	Re: Newbie from Utah helllo im kesmai im newbie too

08-14-2006, 06:45 PM	#7
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Newbie from Utah Welcome!! Sounds like a great find! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

08-15-2006, 09:51 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Newbie from Utah From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-18-2006, 09:14 PM	#9
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,767	Re: Newbie from Utah Welcome to the site Tim. Im sorry about your sons wreck, hope everyone was ok... but congrats on the truck

08-19-2006, 10:01 AM	#10
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: Newbie from Utah Yes, sounds like a good find. We love pictures here so lets get a look at the truck. Welcome to the board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

08-28-2006, 01:13 AM	#11
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Newbie from Utah OK...here is my new beast __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

08-29-2006, 08:46 AM	#12
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Re: Newbie from Utah and from San Antonio, Texas. Nice truck! __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

08-29-2006, 05:27 PM	#13
71SWBChevy Post Whore Join Date: Aug 2005 Location: Owensboro KY Posts: 11,905	Re: Newbie from Utah to the board from KY!!!! __________________ Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons

09-03-2006, 09:06 PM	#14
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Newbie from Utah Are there many board members from Utah? Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

10-02-2006, 05:16 AM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Re: Newbie from Utah Truck looks real good. Always good to get back into the drivers seat of one. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

10-02-2006, 11:12 AM	#16
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: Newbie from Utah Looks like a great truck you found there __________________ Support our site Norwood Survivor

10-11-2006, 10:51 AM	#17
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Newbie from Utah Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-04-2006, 12:11 PM	#18
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: Newbie from Utah Welcome from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

11-05-2006, 02:15 PM	#19
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: Newbie from Utah gotta love the gun rack!! __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

Register or Log In To remove these advertisements.