Big Thanks Re: Fuel Pump Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BobRitts · 11-06-2006, 03:34 PM

Have to give a big thanks to the board for some VERY helpful info (here)

Replaced the fuel pump last night and I would have spent hours and hours getting that tang to seat under the follower if I didn't know about that great little bolt hole in the front of the engine.

Turns out the bolts that hold the fuel pump in are just right for holding the follower slug/piston in it's place while the pump is out.

11-06-2006, 03:34 PM	#1
BobRitts Registered User Join Date: Aug 2006 Location: New Mexico Posts: 39	Big Thanks Re: Fuel Pump Install Have to give a big thanks to the board for some VERY helpful info (here) Replaced the fuel pump last night and I would have spent hours and hours getting that tang to seat under the follower if I didn't know about that great little bolt hole in the front of the engine. Turns out the bolts that hold the fuel pump in are just right for holding the follower slug/piston in it's place while the pump is out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.