Need Tilt disassembly help... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red71cheyenne · 08-07-2006, 05:22 PM

Been trying to pull the two pins out of the sides of the column. The one you screw the 8/32 screws into? I got one to pull out like that, but the other will not budge. I've broken about 30 of the screws trying to pull it. Tried screwing it, slide hammer, you name it. Anyone got a better idea? This is a van tilt that I am converting to floor shift by the way. Thanks, Jeff.

67chevy2wd · 08-07-2006, 05:49 PM

Probably just stuck in there, sounds like the same setup as in my beretta, when I took that apart the one pin was kind of stuck, I just jerked it around and pulled and it came. Move the tilt up and down and pull.

**john** · 08-07-2006, 06:06 PM

You will need a pin puller. They work pretty good on tight pins. Most tool brands have one.

http://www.skywaytools.com/autopg1.html

red71cheyenne · 08-11-2006, 07:58 PM

Thanks guys! I'm ordering one now. Hopefully I'll get it soon and get the column pulled apart finally. Jeff.

**Palf70Step** · 11-06-2006, 09:29 PM

I've been looking over this one again, I know I need a pin puller tool to redo my tilt, but do I need the lock plate tool also to get my tilt apart? This is my first time at rebuilding one of these guys. Thanks

**john** · 11-06-2006, 09:40 PM

Bill unless you have a newer locking column you wont need the lock plate tool.

**Palf70Step** · 11-06-2006, 09:53 PM

Thank you, that is what I thought, but I am just the shade tree mechanic without a shade tree. No it is just a standard 72 truck tilt.

08-07-2006, 05:22 PM	#1
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Need Tilt disassembly help... Been trying to pull the two pins out of the sides of the column. The one you screw the 8/32 screws into? I got one to pull out like that, but the other will not budge. I've broken about 30 of the screws trying to pull it. Tried screwing it, slide hammer, you name it. Anyone got a better idea? This is a van tilt that I am converting to floor shift by the way. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 08-07-2006 at 05:23 PM.

08-07-2006, 05:49 PM	#2
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: Need Tilt disassembly help... Probably just stuck in there, sounds like the same setup as in my beretta, when I took that apart the one pin was kind of stuck, I just jerked it around and pulled and it came. Move the tilt up and down and pull. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

08-07-2006, 06:06 PM	#3
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Need Tilt disassembly help... You will need a pin puller. They work pretty good on tight pins. Most tool brands have one. http://www.skywaytools.com/autopg1.html __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

08-11-2006, 07:58 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Need Tilt disassembly help... Thanks guys! I'm ordering one now. Hopefully I'll get it soon and get the column pulled apart finally. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-06-2006, 09:29 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Need Tilt disassembly help... I've been looking over this one again, I know I need a pin puller tool to redo my tilt, but do I need the lock plate tool also to get my tilt apart? This is my first time at rebuilding one of these guys. Thanks __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-06-2006, 09:40 PM	#6
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Need Tilt disassembly help... Bill unless you have a newer locking column you wont need the lock plate tool. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

11-06-2006, 09:53 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Need Tilt disassembly help... Thank you, that is what I thought, but I am just the shade tree mechanic without a shade tree. No it is just a standard 72 truck tilt. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.