wrench for the dizzy? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevemall · 11-06-2006, 04:51 PM

Hello

What are you guys using to get at the dizzy bolt. My bent wrench just isn't doing it. It gets hot in there.

What is the special tool to buy for no headacke timing ?

zden · 11-06-2006, 04:54 PM

you can pick up a wrench at most parts stores that is basically 2 L shaped sides that snap together.

**LockDoc** · 11-06-2006, 04:57 PM

What Zden said....

I think I got mine at Harbor Freight. Works good.

LockDoc

Longhorn Man · 11-06-2006, 05:19 PM

There should be plenty of room on a small block chevy to just, put a wrench on it.

glock35ipsc · 11-06-2006, 05:39 PM

Yeah on a small block I have always used a regular 'ol 9/16" wrench, but for the last 10 years or so I have been using a header bolt, so then I use a 3/8" wrench.

Jim_PA · 11-06-2006, 07:48 PM

Quote:

Originally Posted by Longhorn Man

There should be plenty of room on a small block chevy to just, put a wrench on it.

Doesn't work for me very well.

I use a 9/16 swivel socket and a long extension. It works OK -- it's a tight angle on the swivel socket, but it gets the job done.

I was just at sears yesterday, and they had actual distributor wrenches in 3 different sizes, and I'M SURE -- they would work perfect. I think they were 7 or 8 bucks.

jacobs · 11-06-2006, 08:17 PM

High end tool companies ie Snap-on should be able to supply one. That's where I got mine 30 years ago.

panhandler62 · 11-06-2006, 08:34 PM

I'm usualy sitting on my radiator when I work on the motor. (Yes, it's relevant! lol)

I don't have any difficulty using a standard box wrench, but that is likely due to the angle I am comming at it from.

krue · 11-06-2006, 10:13 PM

Hands down the best wrench is the flexhead gearwrench ratchet wrench. It's like it was made for the dizzy holddown bolt.

**Palf70Step** · 11-06-2006, 10:24 PM

I am the oddball I guess. One of only three professional tools I have. I have a snap-on a 9/16 and 1/2 distributor wrenchesas well as a pivot pin puller. I love the distributor wrenches. Of course I use them for more than on distributors. I used some a few years ago when I was working on my 82 C10 and they were great, that I had to get me some. Much smaller head and good reach to fit in tight or confined areas around bolt head. I haven't been rich enough to buy any other snap-on tools.

Mine is a bit tight, but my V8 sits in the 6-banger slot.

*trkklr77* · 11-06-2006, 10:53 PM

you can get one at napa autos, the are basicaly a piece of 3/8" solid rod with a 9/16" box end with 2 90* bends and it works pretty damn well for $8.

**Stocker** · 11-07-2006, 12:02 AM

Quote:

Originally Posted by Longhorn Man

There should be plenty of room on a small block chevy to just, put a wrench on it.

That's what I use, but it is close quarters on a K20...

jimmydean · 11-07-2006, 12:27 AM

Quote:

Originally Posted by krue

Hands down the best wrench is the flexhead gearwrench ratchet wrench. It's like it was made for the dizzy holddown bolt.

That's what I use and it works great. I bought a special wrench from Autozone, but it's kinda funky to use. My flexhead works best.

**LockDoc** · 11-07-2006, 12:36 AM

Quote:

Originally Posted by Longhorn Man

There should be plenty of room on a small block chevy to just, put a wrench on it.

There's usually enough room but it seems like everytime I want to loosen or tighten it the motor is hot. That's why I went ahead and sprang for the dist. wrench..... Glad I did.

LockDoc

junkyardjohn · 11-07-2006, 05:25 AM

I've Got About 1/2 Dozen Different Shaped 9/16" Snap-on Dist. Wrenches That I Bought At Pawn Shops For $12 To $15 Each. Man There Is Nothing You Can't Do If You Have The Right Tools.

John

mrein3 · 11-07-2006, 11:32 AM

If you own a 67-72 I believe there are three tools you MUST have. You can get by without any of them however the time saved by owning them is huge.

1. The wrench everybody is talking about in this thread. Mine still has the price tag on it from the used tool store. $15. It is a snap-on.

2. Is a wrench made by kd tools. I'm sure others make them. It has a 3/8ths on one side and a 5/16ths on the other. When you bleed brakes other tools work, however this one works the best.

3. I owned my Chevelle for 10 or so years before I bought this gem. I used little screwdrivers, fuse pullers, and other similar tools to get the horse shoe clip off the door handle or window crank. The clip always goes flying. You are always complaining. Then I bought this tool. Slip the tool behind the crank or handle, the clip slides off and doesn't go flying.

That whole box of tools set me back less than $30. You can't calculate how much time each one saves EVERY time you use it. What is your time worth?

67chevemall · 11-07-2006, 06:19 PM

great info. #1 is what I was lookn for. Thanks I need one of those I can't climb so far in anymore.lol
New bolt too she is a little stripped.
Cheers

Jim_PA · 11-07-2006, 10:31 PM

Maybe I have a strange bolt, but I CANNOT do it with a standard wrench, I can get it so far, then the bolt is simply in the wrong position to get another grab on the head of the bolt to tighten it any more.

jimfulco · 11-08-2006, 12:34 AM

I use a short (5" or so) offset 1/2"x9/16" 12-point box-end. One tooth at a time, sometimes.

11-06-2006, 04:54 PM	#2
zden Registered User Join Date: Apr 2006 Location: Montgomery, TX Posts: 72	Re: wrench for the dizzy? you can pick up a wrench at most parts stores that is basically 2 L shaped sides that snap together. __________________ 1966 Chevrolet Suburban 1955 Chevrolet Bel Air

11-06-2006, 04:57 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,420	Re: wrench for the dizzy? What Zden said.... I think I got mine at Harbor Freight. Works good. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-06-2006, 05:19 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: wrench for the dizzy? There should be plenty of room on a small block chevy to just, put a wrench on it.

11-06-2006, 05:39 PM	#5
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: wrench for the dizzy? Yeah on a small block I have always used a regular 'ol 9/16" wrench, but for the last 10 years or so I have been using a header bolt, so then I use a 3/8" wrench. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-06-2006, 08:17 PM	#7
jacobs Registered User Join Date: Sep 2005 Location: 9000' Mountain Man Posts: 326	Re: wrench for the dizzy? High end tool companies ie Snap-on should be able to supply one. That's where I got mine 30 years ago.

11-06-2006, 04:51 PM	#1
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	wrench for the dizzy? Hello What are you guys using to get at the dizzy bolt. My bent wrench just isn't doing it. It gets hot in there. What is the special tool to buy for no headacke timing ? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

11-06-2006, 08:34 PM	#8
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: wrench for the dizzy? I'm usualy sitting on my radiator when I work on the motor. (Yes, it's relevant! lol) I don't have any difficulty using a standard box wrench, but that is likely due to the angle I am comming at it from. __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

11-06-2006, 10:13 PM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: wrench for the dizzy? Hands down the best wrench is the flexhead gearwrench ratchet wrench. It's like it was made for the dizzy holddown bolt. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-06-2006, 10:24 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	Re: wrench for the dizzy? I am the oddball I guess. One of only three professional tools I have. I have a snap-on a 9/16 and 1/2 distributor wrenchesas well as a pivot pin puller. I love the distributor wrenches. Of course I use them for more than on distributors. I used some a few years ago when I was working on my 82 C10 and they were great, that I had to get me some. Much smaller head and good reach to fit in tight or confined areas around bolt head. I haven't been rich enough to buy any other snap-on tools. Mine is a bit tight, but my V8 sits in the 6-banger slot. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-06-2006 at 10:26 PM.

11-06-2006, 10:53 PM	#11
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 777	Re: wrench for the dizzy? you can get one at napa autos, the are basicaly a piece of 3/8" solid rod with a 9/16" box end with 2 90* bends and it works pretty damn well for $8.

11-07-2006, 05:25 AM	#15
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Re: wrench for the dizzy? I've Got About 1/2 Dozen Different Shaped 9/16" Snap-on Dist. Wrenches That I Bought At Pawn Shops For $12 To $15 Each. Man There Is Nothing You Can't Do If You Have The Right Tools. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

11-07-2006, 11:32 AM	#16
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: wrench for the dizzy? If you own a 67-72 I believe there are three tools you MUST have. You can get by without any of them however the time saved by owning them is huge. 1. The wrench everybody is talking about in this thread. Mine still has the price tag on it from the used tool store. $15. It is a snap-on. 2. Is a wrench made by kd tools. I'm sure others make them. It has a 3/8ths on one side and a 5/16ths on the other. When you bleed brakes other tools work, however this one works the best. 3. I owned my Chevelle for 10 or so years before I bought this gem. I used little screwdrivers, fuse pullers, and other similar tools to get the horse shoe clip off the door handle or window crank. The clip always goes flying. You are always complaining. Then I bought this tool. Slip the tool behind the crank or handle, the clip slides off and doesn't go flying. That whole box of tools set me back less than $30. You can't calculate how much time each one saves EVERY time you use it. What is your time worth? Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

11-07-2006, 06:19 PM	#17
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: wrench for the dizzy? great info. #1 is what I was lookn for. Thanks I need one of those I can't climb so far in anymore.lol New bolt too she is a little stripped. Cheers

11-07-2006, 10:31 PM	#18
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: wrench for the dizzy? Maybe I have a strange bolt, but I CANNOT do it with a standard wrench, I can get it so far, then the bolt is simply in the wrong position to get another grab on the head of the bolt to tighten it any more.

11-08-2006, 12:34 AM	#19
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	Re: wrench for the dizzy? I use a short (5" or so) offset 1/2"x9/16" 12-point box-end. One tooth at a time, sometimes.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.