Crate motor in a Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SLIMJIM · 10-27-2006, 07:32 PM

Anybody ever bolt one of these 260 HP stock crates in a Blazer? Am going to do this hopefully soon and want to know what problems/issues you had. Did the ramhorns bolt up, brackets etc, etc. Since I bought my two wheeler without an engine and tranny, I am buying everything with the intent of it looking factory when I get done. The description Jegs has is "fits most vehicles from 1970-85". Just checking here first to see if its true. Thanks.

SLIMJIM

bouncytruck · 10-27-2006, 07:55 PM

My buddy bought a crate motor for his '66 3/4 ton 4wd long bed. It bolted right in without any problems. It was just the base $1300 long block with tin, not anything preformance oriented.

Jtrux · 10-27-2006, 09:39 PM

That's the exact one I have and it's a perfect fit. You won't have a single problem, the only thing I wish was different is if it came with a oil filter adapter. I scrapped my old motor and didn't even think to remove it only to find out that there almost forty bucks ( i'm young and poor so everything adds up ). Anyways good luck with it, i'll add the link to my blazer cuz I have pics of the motor in it.

http://67-72chevytrucks.com/vboard/s...d.php?t=210092

hotrodhomi · 10-28-2006, 12:27 AM

you will be disappointed with the power. I was. I would spring for something beefier if I were you. If you don't care about power then its a great deal.

**FRENCHBLUE72** · 10-28-2006, 10:40 AM

I boughta crate motor for my blazer the 260 horse version and the power really sucked.... I added some 202 heads,crane cam and lifters and a holley intake and edelbrock carb... Runs really strong now and have never had any issues with the motor..

69TowRig · 10-28-2006, 12:09 PM

Since we are talking about the GM crates, any new opinions on their 290 Hp? I know I asked once in a thread about a year and a half ago. Jeg's has a kit to put an Edelbrock intake, 600 card, and BS on it for just over $2k. I really don't want to buy a brand-new engine and have to mess with changing heads and cams, I'd rather just bolt it in a go.

hotrodhomi · 10-28-2006, 01:35 PM

smedingperformance.com

Jason915 · 10-30-2006, 10:31 AM

The 290HP is the same as the 260HP motor just with the L-82 camshaft. The 290HP has less low end torque and it's doggy in a heavy truck. A friend of mine ran the 260 HP one in his Nova and it only put down 180HP. Most people that buy either engine end up putting a different cam and other things that cost $ to make um run better so my suggestion is to invest in a better performing engine from the get go.

SLIMJIM · 10-30-2006, 05:52 PM

Thanks for all the responses. I'm just looking to build it back stock except for a few factory upgrades, so the 260 horse version will have to do. $$$$$ is the biggest concern so its all I can afford.

Did all of the stock brackets, especially the 69-72 power steering stuff work on these blocks when ya'll did the install?

SLIMJIM

Jason915 · 10-31-2006, 10:22 PM

Quote:

Originally Posted by SLIMJIM

Thanks for all the responses. I'm just looking to build it back stock except for a few factory upgrades, so the 260 horse version will have to do. $$$$$ is the biggest concern so its all I can afford.

Did all of the stock brackets, especially the 69-72 power steering stuff work on these blocks when ya'll did the install?

SLIMJIM

A friend of mine just turned over a vortec headded 355 for 1200 and it runs real strong at least 300 HP and 360ish FT LBS

wingman · 11-12-2006, 02:05 PM

I got that engine from summit for $1299, just find someplace with a better price and they will match it. Everything bolted right up, just remember to install the ps bracket before putting the motor in, and plug the dipstick hole you dont use with the included plug.

ecameron87 · 11-13-2006, 06:18 PM

I have that engine and I absolutly love it. I did change out the CAM though. I can get the specs of that when I get home. I could have gone with a more expensive motor with more HP, but I decided that I wanted fuel injection instead, so the rest of my money went towards a Holley Pro-Jection on an edelbrock manifold. I already had custom exhaust with headers. I have no idea how much HP it is making now, but it is ballsy.

*Billla* · 11-13-2006, 07:19 PM

Quote:

Originally Posted by SLIMJIM

Anybody ever bolt one of these 260 HP stock crates in a Blazer? Am going to do this hopefully soon and want to know what problems/issues you had. Did the ramhorns bolt up, brackets etc, etc. Since I bought my two wheeler without an engine and tranny, I am buying everything with the intent of it looking factory when I get done. The description Jegs has is "fits most vehicles from 1970-85". Just checking here first to see if its true. Thanks.SLIMJIM

It'll fit with no worries, but won't make power where you want it. Most of the GMPP engines are set up for power at higher RPM - the 290 has a pretty flat torque curve (good), but it's flat at ~300 ft/lbs (not so very good). The HP peak is at 5000...so again, not a great fit for your truck. A cam swap will take care of a good bit of that, but it's 8.5:1 which leaves a lot of power on the table. Completely understand money being the guiding factor, but I would take time to swap out for a good RV cam - reasonably cheap and not much work while it's on the stand.

10-27-2006, 07:32 PM	#1
SLIMJIM Registered User Join Date: Sep 2005 Location: Charleston, South Carolina Posts: 285	Crate motor in a Blazer Anybody ever bolt one of these 260 HP stock crates in a Blazer? Am going to do this hopefully soon and want to know what problems/issues you had. Did the ramhorns bolt up, brackets etc, etc. Since I bought my two wheeler without an engine and tranny, I am buying everything with the intent of it looking factory when I get done. The description Jegs has is "fits most vehicles from 1970-85". Just checking here first to see if its true. Thanks. SLIMJIM __________________ 1970 Chevrolet Blazer 2 wheel drive - SOLD

10-27-2006, 07:55 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Crate motor in a Blazer My buddy bought a crate motor for his '66 3/4 ton 4wd long bed. It bolted right in without any problems. It was just the base $1300 long block with tin, not anything preformance oriented. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-27-2006, 09:39 PM	#3
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Crate motor in a Blazer That's the exact one I have and it's a perfect fit. You won't have a single problem, the only thing I wish was different is if it came with a oil filter adapter. I scrapped my old motor and didn't even think to remove it only to find out that there almost forty bucks ( i'm young and poor so everything adds up ). Anyways good luck with it, i'll add the link to my blazer cuz I have pics of the motor in it. http://67-72chevytrucks.com/vboard/s...d.php?t=210092 __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!! Last edited by Jtrux; 10-27-2006 at 09:44 PM. Reason: had to add link

10-28-2006, 12:27 AM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Crate motor in a Blazer you will be disappointed with the power. I was. I would spring for something beefier if I were you. If you don't care about power then its a great deal. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

10-28-2006, 10:40 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Crate motor in a Blazer I boughta crate motor for my blazer the 260 horse version and the power really sucked.... I added some 202 heads,crane cam and lifters and a holley intake and edelbrock carb... Runs really strong now and have never had any issues with the motor.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-28-2006, 12:09 PM	#6
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Crate motor in a Blazer Since we are talking about the GM crates, any new opinions on their 290 Hp? I know I asked once in a thread about a year and a half ago. Jeg's has a kit to put an Edelbrock intake, 600 card, and BS on it for just over $2k. I really don't want to buy a brand-new engine and have to mess with changing heads and cams, I'd rather just bolt it in a go. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

10-28-2006, 01:35 PM	#7
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Crate motor in a Blazer smedingperformance.com __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

10-30-2006, 10:31 AM	#8
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Re: Crate motor in a Blazer The 290HP is the same as the 260HP motor just with the L-82 camshaft. The 290HP has less low end torque and it's doggy in a heavy truck. A friend of mine ran the 260 HP one in his Nova and it only put down 180HP. Most people that buy either engine end up putting a different cam and other things that cost $ to make um run better so my suggestion is to invest in a better performing engine from the get go. __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

10-30-2006, 05:52 PM	#9
SLIMJIM Registered User Join Date: Sep 2005 Location: Charleston, South Carolina Posts: 285	Re: Crate motor in a Blazer Thanks for all the responses. I'm just looking to build it back stock except for a few factory upgrades, so the 260 horse version will have to do. $$$$$ is the biggest concern so its all I can afford. Did all of the stock brackets, especially the 69-72 power steering stuff work on these blocks when ya'll did the install? SLIMJIM __________________ 1970 Chevrolet Blazer 2 wheel drive - SOLD

11-12-2006, 02:05 PM	#11
wingman Registered User Join Date: Apr 2005 Posts: 41	Re: Crate motor in a Blazer I got that engine from summit for $1299, just find someplace with a better price and they will match it. Everything bolted right up, just remember to install the ps bracket before putting the motor in, and plug the dipstick hole you dont use with the included plug.

11-13-2006, 06:18 PM	#12
ecameron87 Registered User Join Date: Nov 2003 Location: Tucson, Arizona Posts: 44	Re: Crate motor in a Blazer I have that engine and I absolutly love it. I did change out the CAM though. I can get the specs of that when I get home. I could have gone with a more expensive motor with more HP, but I decided that I wanted fuel injection instead, so the rest of my money went towards a Holley Pro-Jection on an edelbrock manifold. I already had custom exhaust with headers. I have no idea how much HP it is making now, but it is ballsy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.