Feeling Bad Vibrations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue85 · 11-14-2006, 12:27 PM

My 72 SWB has a vibrations problem at 65mph and up the faster i go the worse it gets, feels like its comin from the front end. I had the wheels balanced, didn't change, should i look into an alignment? Mabye a driveshaft balance, even though it shouldn't because its a one piece, unless its bent or somethin?

krue · 11-14-2006, 12:30 PM

Check your tires carefully for knots or bumps or other irregularities.

Blue85 · 11-14-2006, 12:39 PM

it was doing it before with the old tires too

cdowns · 11-14-2006, 01:30 PM

alignments are good as are non worn suspension pieces

motor mounts tranny mount u joints cracked flexplate or loose torque converter can all be the cause of vibrations

71chevylowrider · 11-14-2006, 01:44 PM

Could it be wheel bearings?

Vince M · 11-14-2006, 09:07 PM

Just went through the same thing and after a new driveshaft with no effect I decided to change out the tranny. (It really needed the 700r4 anyways). Got rid of the vibration but I really think the original problem was due to a bad rear tranny mount. Wasn't much left of it when I took out the TH400. Check the simple stuff first..!!!

84_4x4 · 11-14-2006, 09:09 PM

check the mounts definatly but if they are good check the rotors for warpage and if its 4wd check the hubs see if they arent sticking when they dont need to be.

11-14-2006, 12:27 PM	#1
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	Feeling Bad Vibrations My 72 SWB has a vibrations problem at 65mph and up the faster i go the worse it gets, feels like its comin from the front end. I had the wheels balanced, didn't change, should i look into an alignment? Mabye a driveshaft balance, even though it shouldn't because its a one piece, unless its bent or somethin? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

11-14-2006, 12:30 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Feeling Bad Vibrations Check your tires carefully for knots or bumps or other irregularities. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-14-2006, 12:39 PM	#3
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,170	Re: Feeling Bad Vibrations it was doing it before with the old tires too __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

11-14-2006, 01:30 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Feeling Bad Vibrations alignments are good as are non worn suspension pieces motor mounts tranny mount u joints cracked flexplate or loose torque converter can all be the cause of vibrations __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-14-2006, 01:44 PM	#5
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: Feeling Bad Vibrations Could it be wheel bearings?

11-14-2006, 09:07 PM	#6
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	Re: Feeling Bad Vibrations Just went through the same thing and after a new driveshaft with no effect I decided to change out the tranny. (It really needed the 700r4 anyways). Got rid of the vibration but I really think the original problem was due to a bad rear tranny mount. Wasn't much left of it when I took out the TH400. Check the simple stuff first..!!! __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

11-14-2006, 09:09 PM	#7
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	Re: Feeling Bad Vibrations check the mounts definatly but if they are good check the rotors for warpage and if its 4wd check the hubs see if they arent sticking when they dont need to be.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.