tilt column question.... again - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muscletruck · 10-30-2002, 11:38 PM

ok guys and gals.....i need some ideas, i definatley want to get a tilt column, if i have to go with stock than i will but i would like to open my options...what else will fit in our trucks.....tell me about yours and what you had to do/fab/break

.... to make it work...thanks all

*Zkast* · 10-30-2002, 11:41 PM

Ordered a refurbished unit from a guy on ebay for 225.00 and bolted it right in

when I was shopping for one, there was atleast one on ebay at all times.

chevynut · 10-30-2002, 11:41 PM

I have a one up on Ebay right now.

http://cgi.ebay.com/ebaymotors/ws/eB...871307881&rd=1

**Classic Heartbeat** · 10-31-2002, 02:49 AM

I hope he sends the shift lever with the column... If not GM discontinued them a while back and they are no longer available.... Not even through LMC.. WES www.ClassicHeartbeat.com

Southpa · 10-31-2002, 04:25 AM

Here is another option...worked fine for me!

http://www.net1.net/~sas/TruckPictur...tallation.html

riden2low · 10-31-2002, 02:15 PM

I got mine for $40.00 from a wreaking yard. 1978 Chevy van fits perfect. You have to adjust the shaft by tapping with a hammer on the end to collapse the shaft. They were designed to collapse upon impact and the shaft has small plastic inserts that will give away as to adjust for lenght because the shaft is about 3 inches too long.
Opps, sorry Southpa, I should have opened up your article. But that was the way I did mine. very easy install.

Southpa · 10-31-2002, 03:18 PM

I'd just like to clarify, its NOT my article. Unfortunately, I didn't have a name to go with the website whenever I posted it. Right after reading your post I emailed the owner and asked for his name. From now on I will give credit where credit is due.

10-30-2002, 11:38 PM	#1
muscletruck Registered User Join Date: Jan 2002 Location: anahiem,ca,usa Posts: 201	tilt column question.... again ok guys and gals.....i need some ideas, i definatley want to get a tilt column, if i have to go with stock than i will but i would like to open my options...what else will fit in our trucks.....tell me about yours and what you had to do/fab/break .... to make it work...thanks all __________________ i think i found me truck! 78 Crew Cab Dually 454/TH400, Dual Flows, Edelbrock Intake, Cam, Lifters, Billet Grill, K&N Airfilter, Grant Steering Wheel, A/C, soon to be power windows and locks, lots of plans for this... ....gas prices go down please

10-30-2002, 11:41 PM	#3
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	I have a one up on Ebay right now. http://cgi.ebay.com/ebaymotors/ws/eB...871307881&rd=1 __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454

10-31-2002, 02:49 AM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	I hope he sends the shift lever with the column... If not GM discontinued them a while back and they are no longer available.... Not even through LMC.. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-31-2002, 04:25 AM	#5
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,409	Here is another option...worked fine for me! http://www.net1.net/~sas/TruckPictur...tallation.html __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.

10-31-2002, 02:15 PM	#6
riden2low Registered User Join Date: Oct 2002 Location: Portland OR. Posts: 86	I got mine for $40.00 from a wreaking yard. 1978 Chevy van fits perfect. You have to adjust the shaft by tapping with a hammer on the end to collapse the shaft. They were designed to collapse upon impact and the shaft has small plastic inserts that will give away as to adjust for lenght because the shaft is about 3 inches too long. Opps, sorry Southpa, I should have opened up your article. But that was the way I did mine. very easy install. Last edited by riden2low; 10-31-2002 at 02:22 PM.

10-30-2002, 11:41 PM	#2
Zkast Account Suspended Join Date: May 2002 Location: Olathe, Kansas Posts: 929	Ordered a refurbished unit from a guy on ebay for 225.00 and bolted it right in when I was shopping for one, there was atleast one on ebay at all times.

10-31-2002, 03:18 PM	#7
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,409	I'd just like to clarify, its NOT my article. Unfortunately, I didn't have a name to go with the website whenever I posted it. Right after reading your post I emailed the owner and asked for his name. From now on I will give credit where credit is due. __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.