Ebfabmans DVD, where to buy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

classicchev · 11-19-2006, 02:56 PM

I was on his site, and he says you can buy a DVD through him or one of his selected vendors. Who are his selected vendors? Any in Canada?

Who has his video, and is it the complete cab, doors included, ar is it just the floor repair?

Thanks, Darren

krue · 11-19-2006, 03:28 PM

Just floor/rocker/cab corner/door jambs iirc.

timcos · 11-19-2006, 03:59 PM

I sent him the money directly.

Not sure he actually has any vendors...hope he does but i have not found them. Could have been hopeful thinking when he was doing his website.

Tim

classicchev · 11-19-2006, 04:14 PM

Actually found a vendor, Rokcrln uses the same vendor to move his cab flip drawings http://www.bumpandgrindgarage.com/1213226.html

ebfabman · 11-19-2006, 06:05 PM

Hey classicchev, I have not used any venders. I have always sold direct. I'll PM you with additional info.

classicchev · 11-19-2006, 06:09 PM

Thanks. Another Question for you, have you used or seen the full Goodmark floor, Is it worth the time?

ebfabman · 11-19-2006, 06:24 PM

I have not used the full floor, so I really can't say if its worth the time or not. Seems like more work if you will be replacing areas that aren't rusted. There may be some value in using the full floor as a bigger patch (cutting it up) if the available panels don't cover all the rust in the floor of the cab you're repairing. But I have no experience with the full replacement cab floor. Maybe someone who has will weigh in.

classicchev · 11-19-2006, 07:48 PM

problem is it has been done once, not very well either, It would be nice to replace the whole floor and have one solid peice. The other thing is the rear cab floor patches are not big enough for the complete side. Im sure it shows in your video of what to do that is why I need it.

ebfabman · 11-19-2006, 08:19 PM

Can you post some pics???

11-19-2006, 02:56 PM	#1
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Ebfabmans DVD, where to buy I was on his site, and he says you can buy a DVD through him or one of his selected vendors. Who are his selected vendors? Any in Canada? Who has his video, and is it the complete cab, doors included, ar is it just the floor repair? Thanks, Darren __________________ 67- 72 Parts collecter

11-19-2006, 03:28 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Ebfabmans DVD, where to buy Just floor/rocker/cab corner/door jambs iirc. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" Last edited by krue; 11-19-2006 at 03:28 PM.

11-19-2006, 03:59 PM	#3
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Ebfabmans DVD, where to buy I sent him the money directly. Not sure he actually has any vendors...hope he does but i have not found them. Could have been hopeful thinking when he was doing his website. Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

11-19-2006, 04:14 PM	#4
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Ebfabmans DVD, where to buy Actually found a vendor, Rokcrln uses the same vendor to move his cab flip drawings http://www.bumpandgrindgarage.com/1213226.html __________________ 67- 72 Parts collecter

11-19-2006, 06:05 PM	#5
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Ebfabmans DVD, where to buy Hey classicchev, I have not used any venders. I have always sold direct. I'll PM you with additional info.

11-19-2006, 06:09 PM	#6
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Ebfabmans DVD, where to buy Thanks. Another Question for you, have you used or seen the full Goodmark floor, Is it worth the time? __________________ 67- 72 Parts collecter Last edited by classicchev; 11-19-2006 at 06:14 PM.

11-19-2006, 06:24 PM	#7
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Ebfabmans DVD, where to buy I have not used the full floor, so I really can't say if its worth the time or not. Seems like more work if you will be replacing areas that aren't rusted. There may be some value in using the full floor as a bigger patch (cutting it up) if the available panels don't cover all the rust in the floor of the cab you're repairing. But I have no experience with the full replacement cab floor. Maybe someone who has will weigh in.

11-19-2006, 07:48 PM	#8
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: Ebfabmans DVD, where to buy problem is it has been done once, not very well either, It would be nice to replace the whole floor and have one solid peice. The other thing is the rear cab floor patches are not big enough for the complete side. Im sure it shows in your video of what to do that is why I need it. __________________ 67- 72 Parts collecter

11-19-2006, 08:19 PM	#9
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Ebfabmans DVD, where to buy Can you post some pics???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.