The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-21-2006, 05:58 PM   #1
Chevyman680063
Registered User
 
Chevyman680063's Avatar
 
Join Date: Aug 2006
Location: Georgia
Posts: 850
Carb. Problem

I have an Edelbrock 600 cfm electric choke carb. that i bought brand new a few years ago and for the last 6-8 months it has been giving me problems. Every few months it will start leaking gas out of the left side at the bottom underneath the throttle linkage. I have already replaced the base gasket about 3 or 4 times. Also, everytime it leaks it fouls out the sparkplugs, so I have had to replace the sparkplugs about 3 or 4 times. The carb. is not tightened down too much and it is not too loose either. It doesn't appear that the carb. or intake is warped either. I am seriously tired of having to replace the spark plugs because it adds up over time. The motor is a Chevy 350 smallblock and the intake is an Edelbrock as well. Does anyone have a clue as to why the carb. keeps leaking gas from the base? Thanks in advance.
Chevyman680063 is offline   Reply With Quote
Old 11-21-2006, 06:35 PM   #2
dwaite72lnghrn
Registered User
 
Join Date: Jun 2002
Location: central pa
Posts: 1,525
Re: Carb. Problem

I would pull the top off and see if the carb has junk in the bowls. Sounds like the floats are not stopping the flow of gas and it is just overflowing. Could be a vent problem or a evap canister bad. You didn't say what year truck as some vent through cap and some vent through evap canister.
__________________
72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper
72 bug(the better half's) under reconstruction
2009 HHR aqua blue
71 GMC k20 350/sm465
2009 Chevy hd3500 6.6 Victory Red crew cab dually
Dave & Jeanne
dwaite72lnghrn is offline   Reply With Quote
Old 11-21-2006, 07:01 PM   #3
wedgemon
Registered User
 
wedgemon's Avatar
 
Join Date: Jul 2004
Location: Spanish Springs, NV
Posts: 1,171
Re: Carb. Problem

Check your fuel pressure. Eddy's like about 5 PSI. Also, check your floats.

- Dave
__________________
2003 Silverado K1500 Z71 - Arrival Blue
1973 K5 Cheyenne Blazer 350/TH350/NP203
Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift.

RETIRED: 1980 Scottsdale 4x4

Founding Member:
"TILT WHEEL BELLY." Club
wedgemon is offline   Reply With Quote
Old 11-21-2006, 07:57 PM   #4
Chevyman680063
Registered User
 
Chevyman680063's Avatar
 
Join Date: Aug 2006
Location: Georgia
Posts: 850
Re: Carb. Problem

It's not the original motor. I believe it originally had an inline-6 in it. I thought about the floats maybe being the problem but haven't had a chance to actually check them out. If it is the floats then what should I do, just replace them?
Chevyman680063 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com