Blazer Tank Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 11-26-2006, 02:12 AM

Just read this: http://67-72chevytrucks.com/vboard/s...highlight=tank
And I have a question for those that have done this conversion. How did you connect your line from the blazer tank or fuel cell to the metal line from the in cab tank?

Thanks

PanelDeland · 11-26-2006, 07:42 AM

Most that do this swap go ahead and replace the line.If I were doing a LWB i think I would use a new prebent line from a 'burb.On a SWB you will probably have to bend your own.There are several companies that carry the prebent line for a LWB maybe one of them has done a SWB line for this App.

robsmistress · 11-26-2006, 12:51 PM

Ok it's dqt (dumb question time) iv'e got a 71lwb2x and was wondering about the blazer tank install now this is where it gets good i'm planning on running a tpi on my 350 and was wondering about the return lines since i'm gonna chuck the old tank thats in the cab and fill the hole for the filler on the cab i read that burb lines are pre bent do i need a return line out of a later model burb and will it fit?? thanx for the gr8 site

11-26-2006, 02:12 AM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Blazer Tank Install Just read this: http://67-72chevytrucks.com/vboard/s...highlight=tank And I have a question for those that have done this conversion. How did you connect your line from the blazer tank or fuel cell to the metal line from the in cab tank? Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

11-26-2006, 07:42 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Blazer Tank Install Most that do this swap go ahead and replace the line.If I were doing a LWB i think I would use a new prebent line from a 'burb.On a SWB you will probably have to bend your own.There are several companies that carry the prebent line for a LWB maybe one of them has done a SWB line for this App. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-26-2006, 12:51 PM	#3
robsmistress Registered User Join Date: Nov 2006 Location: colorado springs colorado Posts: 6	Re: Blazer Tank Install Ok it's dqt (dumb question time) iv'e got a 71lwb2x and was wondering about the blazer tank install now this is where it gets good i'm planning on running a tpi on my 350 and was wondering about the return lines since i'm gonna chuck the old tank thats in the cab and fill the hole for the filler on the cab i read that burb lines are pre bent do i need a return line out of a later model burb and will it fit?? thanx for the gr8 site



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.