|
11-27-2006, 10:27 PM
|
#1 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Where to get??
I need a picture of a clutch pedal for a 85-87 truck or 85-91 blazer/ suburban. I have tried classifieds and such and just want someone to point me in the right direction. I only need the pedal, not bracket and brake pedal. Does anyone know where I could locate 1?
The reason for this is I was going to try to use an older pedal set for linkage and modify it for a hydraulic setup. But it don't look like it will work so far.
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a Last edited by edman87; 11-27-2006 at 11:27 PM. |
|
|
|
11-27-2006, 11:11 PM
|
#2 |
|
Registered User
Join Date: May 2003
Location: Lake Oswego, Oregon
Posts: 1,028
|
Re: Where to get??
i think this will help out. http://www.lmctruck.com/icatalog/cc/t50.html
__________________
Ken Morgan For fun: 1964 Volvo 122 For slow: 1984 Chevrolet C-10 For everything else: 1997 BMW M3 |
|
|
|
|
11-27-2006, 11:25 PM
|
#3 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: Where to get??
I need the pedal, the metal part itself.
What I really need is a pic of 1. I will edit my post as such, just realized it is more of a wanted item.
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
|
|
|
|
11-28-2006, 11:23 AM
|
#4 |
|
On a budget like Fred Sanford
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
|
Re: Where to get??
Don't know if this will help you or not but it's all I have....you can see most of the pedal.
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD |
|
|
|
|
11-28-2006, 05:23 PM
|
#5 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: Where to get??
Thanks, but needing a pic of the pedal out of the truck so I can see shape of the shaft.
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
|
|
|
|
11-28-2006, 06:00 PM
|
#6 |
|
www.73-87chevytrucks.com
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: Where to get??
If I still have mine at home I will try and find it to get you a pic. Otherwise it is at the shop, 60 miles away.
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
|
|
|
11-28-2006, 06:59 PM
|
#7 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: Where to get??
That would be appreciated.
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
|
|
|
|
11-28-2006, 09:55 PM
|
#8 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: Where to get??
If not, I'll endure the super cold weather, and snap a pic of the clutch on my truck, lol
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
11-28-2006, 10:05 PM
|
#9 |
|
www.73-87chevytrucks.com
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: Where to get??
It is here. I will upload it after Overhaulin goes off. If you want something specific, let me know.
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
|
|
|
11-28-2006, 10:08 PM
|
#10 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: Where to get??
just trying to figure out the difference in the hydro pedal and the linkage pedal that I have installed. Anything showing the attachment point to the clutch slave and shape of the pedal shaft would be helpful. Thanks everyone
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
|
|
|
|
11-28-2006, 11:16 PM
|
#11 |
|
www.73-87chevytrucks.com
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: Where to get??
Ok, bad news. I pulled it out of the box and the one I have here is mechanical from my '73 that isn't converted yet. If you get all the parts from a donor or GM, you can retrofit the hydraulics from the '85 -up to the pre-'84's.
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
|
|
|
11-29-2006, 09:21 PM
|
#12 |
|
junk collector
Join Date: Dec 2004
Location: above Baton Rouge, LA
Posts: 693
|
Re: Where to get??
Retrofitting the 85up master cyl to the pre85 pedal assy is what I was trying to do, but it sits +-2" to the side of being straight. I also don't know if I put a spacer in there with grade 8 bolt, if it would ahve the correct stroke.
Any info/links on the retrofit? Thanks
__________________
'87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
