|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-30-2006, 11:23 PM
|
#1 |
|
72GMC51
Join Date: Jul 2004
Location: Minnesota
Posts: 233
|
Power brake conversion
Will a 72 power brake pedal assy, including the power booster braket and linkage fit on a 68???? picture in thread http://67-72chevytrucks.com/vboard/s...d.php?t=217818
Thanks John C
__________________
72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished 
Last edited by 72GMC51; 11-30-2006 at 11:24 PM. |
|
|
|
11-30-2006, 11:42 PM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,402
|
Re: Power brake conversion
It should if you get all of the related parts with it. (brackets, rods, Prop valve, etc.)
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
12-01-2006, 01:32 PM
|
#3 |
|
Registered User
Join Date: Dec 2004
Location: NW, WA.
Posts: 1,421
|
Re: Power brake conversion
I installed a 72 PB setup on my 67. You can't use the round cross support rod that mounts to the firewall near the wire harness plug because the firewall is a different shape on 67-68 trucks. The Lower flat brace will work but you have to drill a hole in the floor for it at the bottom end. If you have the smaller booster [skinny single diaphram 9" or 11"] you can go without the brackets.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
