![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2006
Location: Cheney, KS
Posts: 669
|
Metal bed floor....
I know they're out there....Ive seen them, I just cant find them.
My truck is also my daily, and I use it like a truck. Problem being that my factory wooden bed is rotted out so bad I cant put anything in it. And since my dad wont move his 56 (Gasp!) Ford out of the garage....my truck sits out by the curb in the elements. So is there any one that makes a metal bed floor or know if any of the newer bed floors will fit? Its a 70 SWB. Thanks, Mitch |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: Metal bed floor....
They arent made new yet. Your best bet is to find a good used bed and swap yours out or find one with a good floor but wasted sides or find someone who is removing a steel floor for a wood floor. Finding a swb steel floor is pretty hard and when you do they go for alot of $$$$. You could shorten a long bed floor but is not recomended. So really your best and most cost effective one is to replace the wood floor with a new wood floor. Just seal the wood with epoxy and you should be fine. That is what I would do.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2005
Location: Texarkana, AR 71854
Posts: 397
|
Re: Metal bed floor....
Put some Diamond Plate down
__________________
2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 |
![]() |
![]() |
![]() |
#4 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Metal bed floor....
You'll have to swap your front bed panel for it to be "right" too.
You can also just put a sheet of plywood down for now. That's what my stepside had in it when I bought it ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-01-2006 at 03:53 PM. |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,783
|
Re: Metal bed floor....
You can buy the 2 halves for 73-87 --- I might try that route if you can fabricate a little.
Last edited by dennislbrooks; 12-01-2006 at 04:26 PM. |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2005
Location: weatherford,texas
Posts: 1,003
|
Re: Metal bed floor....
i installed 3/16" sheetmetal in my stepside bed......i think there are some pics on the board somewhere......i'll try to find them
http://67-72chevytrucks.com/vboard/s...ighlight=floor here they are!!!!!!!!! Last edited by lilred67; 12-01-2006 at 06:07 PM. |
![]() |
![]() |
![]() |
#7 |
CAN'T FIX NOTHIN
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
|
![]()
I have a very good metal 67 short wheelbase floor I am gonna get rid of I am going with the wood because of the look , I will not be hauling much more than my vintage coca cola cooler so the wood will work for me , my metal floor is the best one I have ever seen in my life with only very very minor rust in just a couple spot's , all the cross sill's are super clean it looks nice and clean underneath as well , I would gladly trade it to a member here for some wood floor parts such as a good rear crosmember and all the sill's in super clean shape for a wood floor and ???
anyone that see's this before they delete it feel free to PM me , |
![]() |
![]() |
![]() |
#8 |
*************
![]() Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,846
|
Re: Metal bed floor....
Has anyone tried to use one out of a later model truck????
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
![]() |
![]() |
![]() |
#9 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,923
|
Re: Metal bed floor....
I would go with Hart_Rod suggestion. Find a late model, cut the floor to fit, then bolt/weld it in. However, as was mentioned, to do it right you'll need a new front panel (or modify the old one). Also, to keep body lines correct you'll need different (or modified) cross braces to make up the bed thickness differences.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 12-02-2006 at 09:13 AM. |
![]() |
![]() |
![]() |
#10 |
Active Member
Join Date: Jan 2005
Location: RDM,Oregon
Posts: 285
|
Re: Metal bed floor....
www.tabcobodyparts.com list left and right bed floor panels for 67-72 PU. $91 each side. This is the only place Ive found that list metal bed floors for our trucks.
HTH::CB |
![]() |
![]() |
![]() |
#11 |
CAN'T FIX NOTHIN
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
|
Re: Metal bed floor....
here is the one I am gonna let go ,,
|
![]() |
![]() |
![]() |
Bookmarks |
|
|