WTB A Rust free 67' - 68' Core Support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*67BABYBLUE* · 12-06-2006, 11:09 AM

I am looking to buy a rust free,damage free core support for my 67' SWB project. Do not want rust. Also a right side wheel for the same project. No rust. Thanks

67Fleet · 12-06-2006, 11:02 PM

Quote:

Originally Posted by 67BABYBLUE

I am looking to buy a rust free,damage free core support for my 67' SWB project. Do not want rust. Also a right side wheel for the same project. No rust. Thanks

Gonna take some serious searching for that. I looked for one for over a year before I found a "perfect" one with -0- rust, the paint was still so shiny I questioned whether or not it was a factory original. Got it and a near perfect grill shell for $100.00. And it was 30 minutes from my house. Total score.

**jerry moss** · 12-06-2006, 11:53 PM

it won't be cheap, but if there's one to be had, Bill at vintage chevy truck out here in calif will have it (510)651-5874

ZOOMY · 12-07-2006, 08:10 AM

Find a 69-72 and remove the headlight extensions.

cypressbog · 12-07-2006, 08:19 PM

Zoomy, Can you detail what that involves? I've got a 68 on the way that has typical rust under the battery.

sameyrasmea72 · 12-07-2006, 09:14 PM

I have one on this 67 that I need to start tearing down. I was going to try to sell the whole front clip but I might sell seperately. I am 99 % sure it is rust free but need to double check.

Also what do you mean by "right side wheel"?

*72CSTC5* · 12-07-2006, 10:35 PM

Where in West Texas are you and how much are you going to want for the front clip?

*67BABYBLUE* · 12-08-2006, 04:14 PM

I'm interested

424shee · 12-08-2006, 04:45 PM

what's the difference between 67,68 and the rest

b&a72 · 12-08-2006, 05:15 PM

If 67 does not want it put me in line for the grille as long as there is no dents or rust.

sameyrasmea72 · 12-08-2006, 11:39 PM

Someone came through and bought the clip.

ks147j111928 · 12-09-2006, 02:05 AM

Edited by Moderator

krue · 12-09-2006, 08:15 AM

If you have what the man needs, tell him. Otherwise don't use his thread to sell your parts. Subscribe and post your own thread.

68C15 · 12-10-2006, 12:44 AM

I may have what you need stashed up in my garage. whats one os these goin for?

*72CSTC5* · 12-10-2006, 12:47 AM

68C15, caution on your post to give you a heads up, you have to be a subscribing member to sell parts. Pay the 25.00 bucks then sell your support.

68C15 · 12-10-2006, 12:55 AM

thanks for the notice 72. I forgot. now if I can figure out how to delete that post.

cypressbog · 12-10-2006, 01:01 AM

So you have to be a subscriber to respond to a WTB thread? I guess your better off just PM'ing the guy with what you have available.

*72CSTC5* · 12-10-2006, 01:11 AM

I am sure they will let you pass since it was in error. Sometimes it is confusing I've done the same in the beginning. If you are making a pay transaction they consider it selling no matter how it originates.

masterbeavis · 12-10-2006, 01:23 AM

If you have what the man wants, post up, PINK OR BLUE!

back to the topic, I have a 'nice 68 core support, shipping probably would be steep from 95623.

67c-10Texas · 12-10-2006, 03:59 PM

would like to learn what it takes to modify a 69-72 core to fit my 67 - it was mentioned that the headlight extinsons need to be removed - any other changes??

68C15 · 12-11-2006, 07:41 AM

nope. that's it.

12-06-2006, 11:09 AM	#1
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	WTB A Rust free 67' - 68' Core Support I am looking to buy a rust free,damage free core support for my 67' SWB project. Do not want rust. Also a right side wheel for the same project. No rust. Thanks

12-06-2006, 11:53 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,898	Re: WTB A Rust free 67' - 68' Core Support it won't be cheap, but if there's one to be had, Bill at vintage chevy truck out here in calif will have it (510)651-5874 __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-07-2006, 08:10 AM	#4
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: WTB A Rust free 67' - 68' Core Support Find a 69-72 and remove the headlight extensions.

12-07-2006, 08:19 PM	#5
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB A Rust free 67' - 68' Core Support Zoomy, Can you detail what that involves? I've got a 68 on the way that has typical rust under the battery.

12-07-2006, 09:14 PM	#6
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: WTB A Rust free 67' - 68' Core Support I have one on this 67 that I need to start tearing down. I was going to try to sell the whole front clip but I might sell seperately. I am 99 % sure it is rust free but need to double check. Also what do you mean by "right side wheel"? Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

12-07-2006, 10:35 PM	#7
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: WTB A Rust free 67' - 68' Core Support Where in West Texas are you and how much are you going to want for the front clip?

12-08-2006, 04:14 PM	#8
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: WTB A Rust free 67' - 68' Core Support I'm interested

12-08-2006, 04:45 PM	#9
424shee Registered User Join Date: Feb 2006 Location: kelso,wa Posts: 55	Re: WTB A Rust free 67' - 68' Core Support what's the difference between 67,68 and the rest

12-08-2006, 05:15 PM	#10
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: WTB A Rust free 67' - 68' Core Support If 67 does not want it put me in line for the grille as long as there is no dents or rust.

12-08-2006, 11:39 PM	#11
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: WTB A Rust free 67' - 68' Core Support Someone came through and bought the clip. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

12-09-2006, 02:05 AM	#12
ks147j111928 ASE Certified Spoon Operator Join Date: Oct 2006 Location: Colorado Springs, CO Posts: 157	Re: WTB A Rust free 67' - 68' Core Support Edited by Moderator Last edited by krue; 12-09-2006 at 08:16 AM.

12-09-2006, 08:15 AM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: WTB A Rust free 67' - 68' Core Support If you have what the man needs, tell him. Otherwise don't use his thread to sell your parts. Subscribe and post your own thread. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-10-2006, 12:44 AM	#14
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: WTB A Rust free 67' - 68' Core Support I may have what you need stashed up in my garage. whats one os these goin for?

12-10-2006, 12:47 AM	#15
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: WTB A Rust free 67' - 68' Core Support 68C15, caution on your post to give you a heads up, you have to be a subscribing member to sell parts. Pay the 25.00 bucks then sell your support.

12-10-2006, 12:55 AM	#16
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: WTB A Rust free 67' - 68' Core Support thanks for the notice 72. I forgot. now if I can figure out how to delete that post.



Register or Log In To remove these advertisements.

12-10-2006, 01:01 AM	#17
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB A Rust free 67' - 68' Core Support So you have to be a subscriber to respond to a WTB thread? I guess your better off just PM'ing the guy with what you have available.

12-10-2006, 01:11 AM	#18
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: WTB A Rust free 67' - 68' Core Support I am sure they will let you pass since it was in error. Sometimes it is confusing I've done the same in the beginning. If you are making a pay transaction they consider it selling no matter how it originates.

12-10-2006, 01:23 AM	#19
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: WTB A Rust free 67' - 68' Core Support If you have what the man wants, post up, PINK OR BLUE! back to the topic, I have a 'nice 68 core support, shipping probably would be steep from 95623.

12-10-2006, 03:59 PM	#20
67c-10Texas Registered User Join Date: Apr 2006 Location: Texas Posts: 259	Re: WTB A Rust free 67' - 68' Core Support would like to learn what it takes to modify a 69-72 core to fit my 67 - it was mentioned that the headlight extinsons need to be removed - any other changes??

12-11-2006, 07:41 AM	#21
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: WTB A Rust free 67' - 68' Core Support nope. that's it.

Register or Log In To remove these advertisements.