We all like junkyard pics heres some - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 12-06-2006, 10:15 PM

They mounted them to something, cause they're in a Chevy.

**PICKMUP** · 12-06-2006, 11:10 PM

Yes, they are Dodge seats. The center seat w/console box is exactly the same as GM...it is worth about $100 by itself.
The others would make a good "custom" covered set, look CST and not cost as much for the cores...IF the mounting brackets are OK.

67-72chevyman · 12-06-2006, 11:59 PM

:

Quote:

Originally Posted by Critter

I believe the Government should create a new office. They should call it something along the lines of “Elderly Automobile Recycling Commissioner”. Of course I would suggest that they appoint yours truly to this position. I would travel across the country and give old vehicles the proverbial “thumbs up” or down depending on the circumstances (pintos and gremlins). I would then adopt all of the survivors and make sure that they went to a good home. All of these pictured would, of course, be spared…or at least parted out!

Thats a crying shame especially the greyish blue truck, and it looks like there is some other good vintage tin, like the 70-72 chevelle or malibu, and on the edge of another picture I seen a gold chevy truck looked to be about a 63-66?. Just think once they go through the crusher their gone for good.

ks147j111928 · 12-07-2006, 01:19 AM

Hoyl crap I want to be able to take off work to go 'shopping'! I'd take that GMC front end in an RPM!

And probably too much other stuff. Since that's in Minn, are there any floors left? I recall some yards back east had trees growing through some cars. Tough to pull parts that way, needed a chainsaw- but had a cordless Sawzall!!

al's71gmc · 12-07-2006, 04:12 AM

If you want any parts, better hurry. When the crusher came to my old scrap yard, they cleared out about 600 cars and trucks in less than a month. I was making a small fortune selling parts on ebay. The owner let me and a buddy take as much as we could get for $100 a day. We were averaging about 2k a day off ebay. But the yard was 200 miles from me and I couldn't get there as much as I would've liked. Now it's all gone, gone, gone....

Myself · 12-07-2006, 11:54 AM

...................................i.......................................

Ram-Man · 12-07-2006, 03:07 PM

Quote:

Originally Posted by al's71gmc

If you want any parts, better hurry. When the crusher came to my old scrap yard, they cleared out about 600 cars and trucks in less than a month. I was making a small fortune selling parts on ebay. The owner let me and a buddy take as much as we could get for $100 a day. We were averaging about 2k a day off ebay. But the yard was 200 miles from me and I couldn't get there as much as I would've liked. Now it's all gone, gone, gone....

I wont get out of bed for 2k a day.

roughedup72 · 12-07-2006, 03:24 PM

_________________i__________________________

Huck · 12-07-2006, 04:57 PM

International also had a set that looks identical to the cheby. Probably made my ths same manufacturer!

WyoRoadDog · 12-07-2006, 08:49 PM

Man, I want that '67 GMC for parts! Why does it have to be so far away?

Ram-Man · 12-07-2006, 09:00 PM

Quote:

Originally Posted by WyoRoadDog

Man, I want that '67 GMC for parts! Why does it have to be so far away?

There was about 6 gmc's out there. I dont mean to rub it in.

sixtysevengmc · 12-07-2006, 09:12 PM

ROADTRIP!!!!!!!!!!!!!!!!!!!!!!11

68C15 · 12-07-2006, 11:48 PM

any overloads?

in a few weeks tha family is making a road trip ti Chicago area. I'm driving so I just may make a left turn on my own.

**too much stuff** · 12-08-2006, 08:12 PM

UPDATE: ram man was nice enough to share some info, so i went and checked these trucks out. The buddy buckets are not chevy. Nor is the frame underneath. He was talking about $125 for them. There are alot of useable parts plus a couple of v-6 gmc trucks. Not much for sheet metal. The one 68 chevy grill is pretty nice. But is now gone...
He knows there is some money to be made, so prices are not real cheap, but he seems pretty fair to work with.
A couple more pics.

1969k10stepside · 12-08-2006, 08:15 PM

hey,it looks like a K20 peaked out wanting to be saved.If only I was closer....

masterbeavis · 12-08-2006, 09:13 PM

Check out those eaton rearends for detroit lockers!! And I see a precious set of HD44 blue dialed hubs, better snag em!!

**jerry moss** · 12-08-2006, 10:18 PM

and the dealer installed brush guard too. looks like a boatload of good pieces. better get wrenchin'

**too much stuff** · 12-08-2006, 11:19 PM

I already did some wrenchin but ran out of time. He wants $75 for the spicer lockouts. They were in ok condition, but one spun easy, and i couldn't turn the other.
Jerry, good eye on the brush gaurd. One item i don't usually look for.
Does anyone know if the gmc v-6 fan shroud is the same as a big block chev???? There was a couple out there. They look similar...

Paul72 · 12-12-2006, 07:11 PM

Eric -

I need original lockouts for the Sierra Grande - any chance you could grab them? Or I could run there myself in a couple of weeks (if it is still there)

Paul

12-06-2006, 10:15 PM	#26
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: We all like junkyard pics heres some They mounted them to something, cause they're in a Chevy.

12-06-2006, 11:10 PM	#27
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: We all like junkyard pics heres some Yes, they are Dodge seats. The center seat w/console box is exactly the same as GM...it is worth about $100 by itself. The others would make a good "custom" covered set, look CST and not cost as much for the cores...IF the mounting brackets are OK.

12-07-2006, 01:19 AM	#29
ks147j111928 ASE Certified Spoon Operator Join Date: Oct 2006 Location: Colorado Springs, CO Posts: 157	Re: We all like junkyard pics heres some Hoyl crap I want to be able to take off work to go 'shopping'! I'd take that GMC front end in an RPM! And probably too much other stuff. Since that's in Minn, are there any floors left? I recall some yards back east had trees growing through some cars. Tough to pull parts that way, needed a chainsaw- but had a cordless Sawzall!! __________________ My six is bigger than your eight 67 K20 292 +.060" SM465 NP203 3.73s 86 4Runner, the daily on 31s 85 4Runner, the wheeler on 38s 92 x-cab truggy project for 2017... tons and 42s and V8 power

12-07-2006, 04:12 AM	#30
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: We all like junkyard pics heres some If you want any parts, better hurry. When the crusher came to my old scrap yard, they cleared out about 600 cars and trucks in less than a month. I was making a small fortune selling parts on ebay. The owner let me and a buddy take as much as we could get for $100 a day. We were averaging about 2k a day off ebay. But the yard was 200 miles from me and I couldn't get there as much as I would've liked. Now it's all gone, gone, gone.... __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! Last edited by al's71gmc; 12-07-2006 at 04:13 AM.

12-07-2006, 11:54 AM	#31
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,131	Re: We all like junkyard pics heres some ...................................i.......................................

12-07-2006, 03:24 PM	#33
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: We all like junkyard pics heres some _________________i__________________________ __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

12-07-2006, 04:57 PM	#34
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: We all like junkyard pics heres some International also had a set that looks identical to the cheby. Probably made my ths same manufacturer!

12-07-2006, 08:49 PM	#35
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: We all like junkyard pics heres some Man, I want that '67 GMC for parts! Why does it have to be so far away? __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

12-07-2006, 09:12 PM	#37
sixtysevengmc village idiot Join Date: Oct 2006 Location: Barbourville,KY Posts: 178	Re: We all like junkyard pics heres some ROADTRIP!!!!!!!!!!!!!!!!!!!!!!11

12-07-2006, 11:48 PM	#38
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: We all like junkyard pics heres some any overloads? in a few weeks tha family is making a road trip ti Chicago area. I'm driving so I just may make a left turn on my own.

12-08-2006, 08:12 PM	#39
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: We all like junkyard pics heres some UPDATE: ram man was nice enough to share some info, so i went and checked these trucks out. The buddy buckets are not chevy. Nor is the frame underneath. He was talking about $125 for them. There are alot of useable parts plus a couple of v-6 gmc trucks. Not much for sheet metal. The one 68 chevy grill is pretty nice. But is now gone... He knows there is some money to be made, so prices are not real cheap, but he seems pretty fair to work with. A couple more pics. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2006, 08:15 PM	#40
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: We all like junkyard pics heres some hey,it looks like a K20 peaked out wanting to be saved.If only I was closer....

12-08-2006, 09:13 PM	#41
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: We all like junkyard pics heres some Check out those eaton rearends for detroit lockers!! And I see a precious set of HD44 blue dialed hubs, better snag em!!

12-08-2006, 10:18 PM	#42
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: We all like junkyard pics heres some and the dealer installed brush guard too. looks like a boatload of good pieces. better get wrenchin' __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-08-2006, 11:19 PM	#43
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: We all like junkyard pics heres some I already did some wrenchin but ran out of time. He wants $75 for the spicer lockouts. They were in ok condition, but one spun easy, and i couldn't turn the other. Jerry, good eye on the brush gaurd. One item i don't usually look for. Does anyone know if the gmc v-6 fan shroud is the same as a big block chev???? There was a couple out there. They look similar... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

12-12-2006, 07:11 PM	#44
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: We all like junkyard pics heres some Eric - I need original lockouts for the Sierra Grande - any chance you could grab them? Or I could run there myself in a couple of weeks (if it is still there) Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

Register or Log In To remove these advertisements.