bed mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yellowgmc · 11-05-2002, 03:12 PM

does anyone know where i can get repro bed mounts? i'm looking for the front mounts onthe fram just behind the cab. i had to cut them to get the bed off. any ideas? also anyone know where i can get whole repro longdeb panels? thanks

yellowgmc · 11-06-2002, 11:18 AM

anyone?

**1971Stepside** · 11-06-2002, 11:27 AM

find a local goodmark dealer for the bed sides. I believe Early Classics sells them. I would look on the parts board or contact guys like Wes to see if you could find some good clean originals. If you are talking about the bolts and bushings for the bed mounts almost any of the vendors on this board can get you those. I bought mine from Chevy Duty.

yellowgmc · 11-06-2002, 12:34 PM

i'm looking for the actual upside down u shaped metal mount that attaches to the frame. the pic i attached isn't up close but i need the mounts that are right behind the cab. you can kinda see where i had to cut the old ones.

crazy longhorn · 11-06-2002, 01:57 PM

Im not sure you can get that bracket new, but a trip to the boneyard should get you set

Big69C20 Toy · 11-06-2002, 04:50 PM

i think most of the vendors sell those items, check chevy duty and some others but i coulda swore.... (crs might be kicking tho)

**1971Stepside** · 11-06-2002, 04:52 PM

I have not seen those reproduced. I bet you will have to find a donor truck. Grind the two rivets off and they are yours.

**TxGary** · 11-06-2002, 07:09 PM

yellowgmc, sent you PM on the brackets.

Huck · 11-06-2002, 10:13 PM

Anyone parting out trucks should be able to fix you up with a couple of good bed mounts. As far as bed sides, don't believe anyone is making the long bed sides---just the short fleet sides.
Good luck

Kid · 11-06-2002, 10:45 PM

I think I still have mine I took off when cutting my frame. You can have them for the cost of shipping if you want them.

MOTHERTRUCKERS · 11-06-2002, 10:50 PM

I have them in stock, sandblasted and primed for short or longbeds.

11-05-2002, 03:12 PM	#1
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	bed mounts does anyone know where i can get repro bed mounts? i'm looking for the front mounts onthe fram just behind the cab. i had to cut them to get the bed off. any ideas? also anyone know where i can get whole repro longdeb panels? thanks __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

11-06-2002, 11:18 AM	#2
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	anyone? __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

11-06-2002, 11:27 AM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	find a local goodmark dealer for the bed sides. I believe Early Classics sells them. I would look on the parts board or contact guys like Wes to see if you could find some good clean originals. If you are talking about the bolts and bushings for the bed mounts almost any of the vendors on this board can get you those. I bought mine from Chevy Duty. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

11-06-2002, 12:34 PM	#4
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	i'm looking for the actual upside down u shaped metal mount that attaches to the frame. the pic i attached isn't up close but i need the mounts that are right behind the cab. you can kinda see where i had to cut the old ones. Attached Images __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

11-06-2002, 01:57 PM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Im not sure you can get that bracket new, but a trip to the boneyard should get you set __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

11-06-2002, 04:50 PM	#6
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	i think most of the vendors sell those items, check chevy duty and some others but i coulda swore.... (crs might be kicking tho) __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.

11-06-2002, 04:52 PM	#7
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I have not seen those reproduced. I bet you will have to find a donor truck. Grind the two rivets off and they are yours. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

11-06-2002, 07:09 PM	#8
TxGary Registered User Join Date: Jul 2001 Location: Bowie, Texas 76230 Posts: 1,061	yellowgmc, sent you PM on the brackets. __________________ 71 C-10 SWB 1969 C-30 Custom Camper Motorhome Restoration in progress. 2020 Chevy 2500 Crew 4x4 LTZ Diesel 2024 Chevy Tahoe Z71 4X4 2015 Diamond C 22' HD car hauler Bowie, Texas 76230

11-06-2002, 10:13 PM	#9
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Anyone parting out trucks should be able to fix you up with a couple of good bed mounts. As far as bed sides, don't believe anyone is making the long bed sides---just the short fleet sides. Good luck

11-06-2002, 10:45 PM	#10
Kid Senior Member Join Date: Jun 2002 Location: Kansas Posts: 702	I think I still have mine I took off when cutting my frame. You can have them for the cost of shipping if you want them. __________________ The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348

11-06-2002, 10:50 PM	#11
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I have them in stock, sandblasted and primed for short or longbeds. __________________ Rest in Peace Ed. Thanks for all the good times.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.