need some info on a cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jamon8 · 12-15-2006, 08:25 AM

summit has a bunch of cams avaliable

http://store.summitracing.com/egnsea...s=P%5FRank%7C0

as we all know summit does not make anything I bought sum-g5000 and I think it was made by crane

you can go with a low lobe seperation and have a choppy idle but unless do not have power brakes you will have problems with the amount of vaccum that is nessesary to stop and will have to buy a vaccum pump.

the first cam I showed you will have a nice slightly choppy idle and will pull real nice through the 5500 range without killing you on gas

12-15-2006, 08:25 AM	#1
jamon8 Registered User Join Date: Apr 2006 Location: southern Il Posts: 335	Re: need some info on a cam summit has a bunch of cams avaliable http://store.summitracing.com/egnsea...s=P%5FRank%7C0 as we all know summit does not make anything I bought sum-g5000 and I think it was made by crane you can go with a low lobe seperation and have a choppy idle but unless do not have power brakes you will have problems with the amount of vaccum that is nessesary to stop and will have to buy a vaccum pump. the first cam I showed you will have a nice slightly choppy idle and will pull real nice through the 5500 range without killing you on gas Last edited by jamon8; 12-15-2006 at 08:30 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.