mis-information! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tom · 11-06-2002, 05:58 PM

Not to bag on this site, but there are people on here that spread mis-information. I dont know if its on purpose, I highly doubt it, but its still there. Case in point, this thread http://67-72chevytrucks.com/vboard/s...threadid=29227

They say, repeatedly, that vortec heads are as good as they get box stock, and arent desinged to do any better. This is horse ****. Thats like saying theres no reason to port AFR heads cause they are already some of the best out there and designed to be great from the box. I want to let them know this is wrong, but I dont want to sound annoying [especially with the vortec head topic, its been done] What do you guys think?

ocbaud · 11-06-2002, 06:10 PM

my friend told me last night that vortec heads cost $4000

i laughed a lot, and showed him that they were really cheap

low 84 · 11-06-2002, 06:40 PM

i would honestly just leave it at what you did. you made your point so if they don't want to listen to expireance, let them do it there way

87gmc · 11-06-2002, 07:05 PM

yeah theres no point in getting into something with them we all will believe what we want an we all know vortecs are nice. so anyways....

**swervin ervin** · 11-06-2002, 08:01 PM

Personally, I would let it go. Besides, they don't give you a prize if you win.

Everyone will believe what they want to no matter what you tell them. It's just the way stuff is. I found out a long time ago, to give out the info you have, then let everyone make their own decisions on what they want to do with it. I don't try to force my beliefs on anyone. If they ask a question, I give my opinion. Then what they do with it is their buisness. It doesn't really matter to me if they listen to me or not. After all it's their money and truck.

Tom · 11-06-2002, 10:46 PM

As usual you guys are right. I just dont like people getting the wrong info when the correct stuff is out there. It happened to me when I was starting in cars. Live and learn right?

*racedvl* · 11-06-2002, 11:37 PM

Well, ya gotta rembember there is some 5000 members, and probilby 2500 that are active. Same interests or not, that many people can't always get along on every topic. I wouldn't sweat it.

PHOENIX · 11-07-2002, 02:41 PM

Quote:

Originally posted by swervin ervin

I don't try to force my beliefs on anyone. If they ask a question, I give my opinion. Then what they do with it is their buisness.

This coming from the same guy that held a gun to my neck and said "you better buy that 1904 or youll regret it"

j/k

Mike the 1904 is still working good!

11-06-2002, 05:58 PM	#1
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,720	mis-information! Not to bag on this site, but there are people on here that spread mis-information. I dont know if its on purpose, I highly doubt it, but its still there. Case in point, this thread http://67-72chevytrucks.com/vboard/s...threadid=29227 They say, repeatedly, that vortec heads are as good as they get box stock, and arent desinged to do any better. This is horse ****. Thats like saying theres no reason to port AFR heads cause they are already some of the best out there and designed to be great from the box. I want to let them know this is wrong, but I dont want to sound annoying [especially with the vortec head topic, its been done] What do you guys think? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

11-06-2002, 06:40 PM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i would honestly just leave it at what you did. you made your point so if they don't want to listen to expireance, let them do it there way __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-06-2002, 07:05 PM	#4
87gmc I Got My Engine!!!!! Join Date: Oct 2002 Location: Palmer, AK Posts: 254	yeah theres no point in getting into something with them we all will believe what we want an we all know vortecs are nice. so anyways.... __________________ F.O.R.D. "F*cked Over Rebuilt Dodge" -+-+-+-+Cameron+-+-+-+- 1987 GMC HIGH SIERRA LWB 1500 32X11.50 383 TBI/Vortec Heads/Intake MSD Ignition Dual Exhaust Custom Pinstriping Sweet interior & stereo http://www.cgalvin29.freehomepage.com

11-06-2002, 08:01 PM	#5
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Personally, I would let it go. Besides, they don't give you a prize if you win. Everyone will believe what they want to no matter what you tell them. It's just the way stuff is. I found out a long time ago, to give out the info you have, then let everyone make their own decisions on what they want to do with it. I don't try to force my beliefs on anyone. If they ask a question, I give my opinion. Then what they do with it is their buisness. It doesn't really matter to me if they listen to me or not. After all it's their money and truck. __________________ Mike 1985 Chevy C-10

11-06-2002, 10:46 PM	#6
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,720	As usual you guys are right. I just dont like people getting the wrong info when the correct stuff is out there. It happened to me when I was starting in cars. Live and learn right? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

11-06-2002, 06:10 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	my friend told me last night that vortec heads cost $4000 i laughed a lot, and showed him that they were really cheap

11-06-2002, 11:37 PM	#7
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Well, ya gotta rembember there is some 5000 members, and probilby 2500 that are active. Same interests or not, that many people can't always get along on every topic. I wouldn't sweat it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.