This was the culprit! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myersjeremy · 12-24-2006, 05:09 PM

I happened to take a look under my hood today. I have the check valve connected on 2 of the 3 sides. I am guessing the one side that's not hooked up feeds into the carb once I get the engine mounted back in. One side runs into the firewall and I traced the other one down to a black plastic ball against the firewall on the driver's side. On the side of the ball there is a tee half way down with nothing connected in to it. Is yours similar to that? What connects there? Thanks for all the help!!!!!

Jeremy

12-24-2006, 05:09 PM	#5
myersjeremy Registered User Join Date: Nov 2005 Location: nc Posts: 118	Re: This was the culprit! I happened to take a look under my hood today. I have the check valve connected on 2 of the 3 sides. I am guessing the one side that's not hooked up feeds into the carb once I get the engine mounted back in. One side runs into the firewall and I traced the other one down to a black plastic ball against the firewall on the driver's side. On the side of the ball there is a tee half way down with nothing connected in to it. Is yours similar to that? What connects there? Thanks for all the help!!!!! Jeremy Last edited by myersjeremy; 12-24-2006 at 05:10 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.