want to trade

[pkj]

i will trade a complete PPG paint kit that will include at the very least jp202- 2 part primer,200? sealer, base coat, dcu 2021 clear, wax & degreaser, strainers, mixing cups, mixing sticks,tac rags, final wipe towels, all reducers and additives. any color or cmbination of colors. this will be a generous kit in volumn. you wont run out unless you dump it on the floor. i can supply differnt stuff if needed aslong as its PPG i will send a final spray-out card on choosen color first. stuff i am looking for:
air managment kit-i already have bags and brackets mounted, need rest
drop spindal, 6 lug disk brake front conversion kit
sb scatter shield, 400 sb flywheel, good clutch set-up
good performance heads for 400 sb, read my 400 opinions needed thread under engine section.
dual quad set-up
aftermarket hei
good oilpan
roller rockers
i dont know so what do yiu have you want to trade, like i said i can make the paint kit as complete as you want to go any level you want to take you truck to. please respond by this post first.

[72dually]

Wow.......I wish you were closer But I think shipping would be excess

I could get the front disc brake set-up w/stock spindles or without, including the rear camaro/impala disc brakes brake setup too
Pan
Roller rockers

[pkj]

ttt

[pkj]

thanks for all the responses pm to me. anyone else intreasted? pkj

[454_72_4X4]

I've got a 7 quart oil pan, (gotta find the pump pickup...), and maybe a good clutch setup.
I also have a balance plate that allows you to use any "normal" chevy flywheel, (internally balanced).

[BIGCHEVYMAN]

i have a standard shift small block 400 flywheel and a set of 461 double hump heads if your interested.

[pkj]

ttt