![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
What size ubolts do I need? Plates, anything else
I'll be swapping for 3/4 ton axles (from 10 and 12 bolt) to d44 and 14b. I dont have ubolts for the new axles and dont know what size I need them. Anybody know what size I need? Also do part stores carry spring plates. I'll be adding a 4" block in the rear also. Thanks for any help
Edit: I dont have the axles yet otherwise I would just measure myself. Thanks
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 01-05-2007 at 12:51 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2000
Location: Chester County PA, USA
Posts: 1,228
|
Re: What size ubolts do I need? Plates, anything else
Get the hardware from the 3/4 ton truck your getting the axles from. Even if the u bolts are torched, they would be close to what u need. Then you could take them to the spring shop and get them made. (plus the height of your block). You can get the spring plates there too if you dont have them. Parts store dosent sell spring plates.
__________________
72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania |
![]() |
![]() |
![]() |
#3 | |
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Re: What size ubolts do I need? Plates, anything else
Quote:
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|