Wiring Help with donor column

[gotmud]

I have a column from a 86 1500 that I am putting in. It has tilt.
The column is a auto shift on the tree.
The blinker switch has wipers (and a delay I think), high beams, cruise, etc. The bottom of the column there are several different connectors where about 18-25 wires terminate. Can anyone help with a diagram or advise on the wiring on it into my truck? I bought a universal wiring kit which is nice but doesnt pinpoint the numerious wires coming from the column.

In advance thanks!!!!!!!!!!!!!
Glenn

[Longhorn Man]

In case you don't know, a van tilt from a 72 - 81 van would be very close to a bolt on, and look totally stock. With this one you have now, you have an ignition switch with steering wheel lock and the other switches you mentioned that will be a bit of a pain to wire up, and then you'll have all the switches still on the dash to try and fill in or what ever. Not to mention, the one you have is a larger diameter that you'll have to do some mods just to get it to fit under the dash.

[gotmud]

I knew that but I got the donor truck for free and already have it all bolted in with steering and all ready to roll....just wont crank without the copper in right.