accelerator and trans linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nimrocker · 01-07-2007, 07:00 PM

anyone know of a publication that will show me the PROPER way to attach my linkage to my 64 c10 [carb and tranny], or some pics and general info. the hillbilly who owned it before has it all rigged wrong. it's a 283 2bbl. thanks.

ol Curt · 01-07-2007, 07:47 PM

If you have an email you will send me, I'll send you a scan from the assembly manual. The scans are too large a file and I can't attach them to a private message. Have yet to figure out ho wto reduce the scan size.

Bob

olcurt1966@gmail.com

ol Curt · 01-07-2007, 08:04 PM

OK, Now I have the file size reduced and saved as jpeg, just need to know how to add a photo to a post.....

19GMC63 · 01-07-2007, 11:28 PM

I've been wondering the same thing.
The PO just had the cable tied in a knot at the throttle lever.

Anyone know where I can get one of those clips?

ol Curt · 01-07-2007, 11:43 PM

You can just drill a hole in it and put a pin in. I just did that to mine. I did see those clips somewhere the other day (right after I drilled). I think I marked the site. I'll see if I can find it.

ol Curt · 01-07-2007, 11:49 PM

Look under Misc. Clips

http://mrgusa.com/fasindex.htm

19GMC63 · 01-08-2007, 12:13 AM

sweet. Thanks for the link.

62ChevyStep · 01-08-2007, 12:14 AM

I just went to my local NAPA store and they had them there.

01-07-2007, 07:00 PM	#1
nimrocker Registered User Join Date: Aug 2006 Location: tucson az Posts: 12	accelerator and trans linkage anyone know of a publication that will show me the PROPER way to attach my linkage to my 64 c10 [carb and tranny], or some pics and general info. the hillbilly who owned it before has it all rigged wrong. it's a 283 2bbl. thanks.

01-07-2007, 07:47 PM	#2
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: accelerator and trans linkage If you have an email you will send me, I'll send you a scan from the assembly manual. The scans are too large a file and I can't attach them to a private message. Have yet to figure out ho wto reduce the scan size. Bob olcurt1966@gmail.com

01-07-2007, 08:04 PM	#3
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: accelerator and trans linkage OK, Now I have the file size reduced and saved as jpeg, just need to know how to add a photo to a post..... Attached Images

01-07-2007, 11:28 PM	#4
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: accelerator and trans linkage I've been wondering the same thing. The PO just had the cable tied in a knot at the throttle lever. Anyone know where I can get one of those clips?

01-07-2007, 11:43 PM	#5
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: accelerator and trans linkage You can just drill a hole in it and put a pin in. I just did that to mine. I did see those clips somewhere the other day (right after I drilled). I think I marked the site. I'll see if I can find it.

01-07-2007, 11:49 PM	#6
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: accelerator and trans linkage Look under Misc. Clips http://mrgusa.com/fasindex.htm

01-08-2007, 12:13 AM	#7
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: accelerator and trans linkage sweet. Thanks for the link.

01-08-2007, 12:14 AM	#8
62ChevyStep Senior Member Join Date: May 2005 Location: Portales, NM Posts: 359	Re: accelerator and trans linkage I just went to my local NAPA store and they had them there. __________________ ________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.