HELP!!!!! Outrigger????????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean23 · 11-05-2002, 11:05 PM

I need to know how the out riggers sit with the rocker panels on my 68 c10. Could someone show me a picture of them or a resonable hand drawn facsimilie.... Thanks I'm going to be doing the passenger side of my cab this weekend. I got the floor pans rockers cab corners footwells etc to do the job, not sure how the outrigger sits though,

JimKshortstep4x4 · 11-06-2002, 09:22 AM

Are you refering to the cab supports? If you are, your best bet is an assembly manual, because of the way the they fasten to the pillars, inner rockers and outer rockers.

Jim

Dean23 · 11-08-2002, 09:40 PM

No its an outriger is is shaped like a z only the center is straight up and down, not slanted i think it might go inside the rocker like a brace, just not sure

ebfabman · 11-08-2002, 10:27 PM

Dean, you may be talking about the inner rocker???

If so, here's a pic of one installed

Dean23 · 11-08-2002, 10:30 PM

No thats still not it. It is like a z only straight and about the length of a rocker, I 'm sure it is used as a brace for the rocker panel. lmc and chevy duty have pics of them, as well as impala bobs.

lugnuts · 11-09-2002, 07:35 PM

I think it's like a floor brace and it goes between the front and rear cab support about mid way between the trans hump and the inner rocker panel. There should be one on the drivers side just like it.

_____________________________
1972 Chevy Short Stepside

**chevy71super** · 11-10-2002, 01:50 PM

Is this what you are looking for?

Dean23 · 11-10-2002, 09:33 PM

YEah those are them I realized it after the fact. Mine are in good shape so I won't need them. Just my floor pans ad mounts and rockers are gone. I am half done the passenger side, and took lots of pics of the progress

11-05-2002, 11:05 PM	#1
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	HELP!!!!! Outrigger????????? I need to know how the out riggers sit with the rocker panels on my 68 c10. Could someone show me a picture of them or a resonable hand drawn facsimilie.... Thanks I'm going to be doing the passenger side of my cab this weekend. I got the floor pans rockers cab corners footwells etc to do the job, not sure how the outrigger sits though, __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-08-2002, 09:40 PM	#3
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	No its an outriger is is shaped like a z only the center is straight up and down, not slanted i think it might go inside the rocker like a brace, just not sure __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-08-2002, 10:27 PM	#4
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Dean, you may be talking about the inner rocker??? If so, here's a pic of one installed Attached Images

11-08-2002, 10:30 PM	#5
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	No thats still not it. It is like a z only straight and about the length of a rocker, I 'm sure it is used as a brace for the rocker panel. lmc and chevy duty have pics of them, as well as impala bobs. __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-09-2002, 07:35 PM	#6
lugnuts Registered User Join Date: Nov 2002 Posts: 13	I think it's like a floor brace and it goes between the front and rear cab support about mid way between the trans hump and the inner rocker panel. There should be one on the drivers side just like it. _____________________________ 1972 Chevy Short Stepside Last edited by lugnuts; 11-09-2002 at 07:40 PM.

11-06-2002, 09:22 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Are you refering to the cab supports? If you are, your best bet is an assembly manual, because of the way the they fasten to the pillars, inner rockers and outer rockers. Jim

11-10-2002, 01:50 PM	#7
chevy71super Registered User Join Date: Jan 2002 Location: So Cal Posts: 658	Is this what you are looking for? Attached Images

11-10-2002, 09:33 PM	#8
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	YEah those are them I realized it after the fact. Mine are in good shape so I won't need them. Just my floor pans ad mounts and rockers are gone. I am half done the passenger side, and took lots of pics of the progress __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.