Replacement Gas Tank filler - The 1947 - Present Chevrolet & GMC Truck Message Board Network

whatnow123 · 01-10-2007, 03:32 PM

Anyone have ideas for a simple flush (or below) the floor of bed filler neck/cap for the blazer tank kit ? I've been looking for some sort of universal short neck to attach to the steel blazer tank I just installed and haven't found anything. I want a simple 90 degree turn pipe up with a cap and can't find anything. I have thought about using exhaust pipe already, but then I won't have a cap to put on it. I'd like to be able to fill it through the bed similar to what the fuel cell guys are doing, but off to the side.

Any ideas?

smoked68 · 01-10-2007, 03:47 PM

Dont know if this is close but this is what I ordered for mine just minutes ago. Sits flush against cab where mine used to stick out...you could always weld a 90 or something.

PanelDeland · 01-10-2007, 05:20 PM

Go to the boat store.They will have several styles.Most street rod shops will also have different styles.

jay-dawg · 01-10-2007, 06:47 PM

Quote:

Originally Posted by PanelDeland

Go to the boat store.They will have several styles.Most street rod shops will also have different styles.

ditto on the boat store. they have it with the key for far less than a cool cap.

01-10-2007, 03:32 PM	#1
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Replacement Gas Tank filler Anyone have ideas for a simple flush (or below) the floor of bed filler neck/cap for the blazer tank kit ? I've been looking for some sort of universal short neck to attach to the steel blazer tank I just installed and haven't found anything. I want a simple 90 degree turn pipe up with a cap and can't find anything. I have thought about using exhaust pipe already, but then I won't have a cap to put on it. I'd like to be able to fill it through the bed similar to what the fuel cell guys are doing, but off to the side. Any ideas? Last edited by whatnow123; 01-10-2007 at 03:38 PM.

01-10-2007, 03:47 PM	#2
smoked68 Registered User Join Date: Oct 2006 Location: Rock Hill, SC Posts: 421	Re: Replacement Gas Tank filler Dont know if this is close but this is what I ordered for mine just minutes ago. Sits flush against cab where mine used to stick out...you could always weld a 90 or something. __________________ 1968 chevy shortbed, Dark Shadow Gray 4 bolt 383 Stroker,Weiand Super Charger, disc brakes, 9 inch, 391 gear, 20" Eagle wheels, muncie 4 speed/ Hurst shifter, 4/7 drop, Hedman midlengths, 3 inch exhaust w/ 2 chamber flows. 1966 Mustang with 306 roller, c-4, 9 inch Detroit locker rear. 1965 Fastback Mustang w/347 stroker, top loader 4spd, 9 inch detroit locker. 1966 Mustang coup, 306 roller, c4, 9 inch. 65 Cobra, 427, T6oo, 9inch, of course. First gen Hayabusa, airbox mod and running 2 exhaust cams.. Zoom Zoom Zoom Last edited by smoked68; 01-10-2007 at 03:48 PM.

01-10-2007, 05:20 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Replacement Gas Tank filler Go to the boat store.They will have several styles.Most street rod shops will also have different styles. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.