door difference?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dishow · 01-10-2007, 07:49 PM

hi.i need to get a drivers side door for my 67.I know where theres one off a 72.will it fit?I noticed in LMC,they list 67-71,then 72 seperatly.whats the difference?will it still fit?thanks guys.

kyull67 · 01-10-2007, 07:53 PM

I think just the inside where the door panels bolts to. It should still work on any 67-72 though.

pharcyde05 · 01-10-2007, 07:56 PM

yea i am prety shure thats right i know they will bolt up and all that the diffrance is door pannel

Huck · 01-10-2007, 08:57 PM

72 has a dimple just below the vent window where a screw goes through to tighten the outer and inner panels of the door. Unique to 72 trucks but common on older blazers/Jimmys. Doesn't create a problem to install a 72 door on 67 truck.

CPNEJR · 01-10-2007, 09:16 PM

the doors are exactyly the same except for the dimple that Huck mentioned

short69 · 01-10-2007, 09:46 PM

another difference is that '72 used a diffirent door panel than all the other years so the little stubs that the window crank and door handle connect to are about a quarter of an inch longer than the 67-71 ones.

01-10-2007, 07:49 PM	#1
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	door difference?? hi.i need to get a drivers side door for my 67.I know where theres one off a 72.will it fit?I noticed in LMC,they list 67-71,then 72 seperatly.whats the difference?will it still fit?thanks guys. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

01-10-2007, 07:53 PM	#2
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: door difference?? I think just the inside where the door panels bolts to. It should still work on any 67-72 though. __________________ The first '67 The current '67 '63 Biscayne

01-10-2007, 07:56 PM	#3
pharcyde05 Senior Member Join Date: Mar 2006 Location: modesto CA Posts: 239	Re: door difference?? yea i am prety shure thats right i know they will bolt up and all that the diffrance is door pannel __________________ http://www.cardomain.com/ride/2461088

01-10-2007, 08:57 PM	#4
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: door difference?? 72 has a dimple just below the vent window where a screw goes through to tighten the outer and inner panels of the door. Unique to 72 trucks but common on older blazers/Jimmys. Doesn't create a problem to install a 72 door on 67 truck.

01-10-2007, 09:16 PM	#5
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: door difference?? the doors are exactyly the same except for the dimple that Huck mentioned __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

01-10-2007, 09:46 PM	#6
short69 Registered User Join Date: Oct 2006 Location: las vegas Posts: 88	Re: door difference?? another difference is that '72 used a diffirent door panel than all the other years so the little stubs that the window crank and door handle connect to are about a quarter of an inch longer than the 67-71 ones. __________________ 69 shorty w/ 67 front clip



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.