|
11-11-2002, 05:12 PM
|
#1 |
|
RHCP afficianado
Join Date: Oct 2002
Location: McLoud, OK
Posts: 789
|
Question for Swervin
Hey Mike, how much money do you have invested in that new console you built?
__________________
~Ryan~ 89 S-10 Blazer with a 4.3L 96 Ford Crown Vic P71 4.6L V8. This car rocks.  Here are some links to some good music. Jack Johnson Donavon Frankenreiter |
|
|
|
11-11-2002, 06:16 PM
|
#2 |
|
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Not Mike but I bet he has a hell of alot more time than $$ in it.
have it upholstered yet Mikey?  -Jeff |
|
|
|
|
11-11-2002, 07:16 PM
|
#3 |
|
You get what you pay for
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Not much money, but time out the arse.
So far all I've bought are 2 pieces of plywood for speaker box and console both. 1 piece of plywood will be plenty for the console. Besides plywood, all you need is misc screws, nails. Jeff, no I don't have it upholstered yet. Planning on going tomorrow to talk to the guy. Just today finished with the vents for the amps and heat routing. I figured out what to do with the heat duct. It has three outlets, one on each side and the one in the middle. All I did was remove the duct from the heater. It has baffles in it to route the air to all three places. I removed some of the duct and blocked the middle one off. This lets all the air out the two sides. Then I put a small round vent in the drivers side of the console so air could come out. Once the duct is put back on, it works great.
__________________
Mike 1985 Chevy C-10 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
