Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-11-2006, 04:22 PM | #1 |
Registered User
Join Date: Dec 2006
Location: Hatfield, PA
Posts: 9
|
Hola from PA (Philly Area)
After letting it sit for about 8 years I'm finally getting on my '72 C-10 Fleetside.
Not being one for Carbs, I've picked up an LT1 to handle forced-induction duties. At this point I'm porting the heads and re-working the combustion chambers (I shivered when I saw the casting of these stock heads--talk about dime-store castings). I've got an Eagle 4340 crank and H-beam rods on order, but am still deciding on pistons. I'll probably end up running a FAST system unless I come across something else interesting (thought about an AEM race-box, as that's what I'm used to) pops up, to feed the Twin 50-trims I'll be hanging off of it. I'm sure the motor would support quite a bit of power once done, however, with this chassis, I'm honestly afraid of putting down anymore then 550-600 to the wheels so I'm keeping it somewhat low-buck and low-boost. ***edited by moderator*** Thanks for all of the info you guys put up to the board, and if anyone needs anything, let me know. I'm not interested in really getting into the Domestic Market but have a ton of connections on Forced Induction and Engine parts for the Chevrolet motors. Josh www.jnztuning.com Last edited by krue; 12-12-2006 at 03:00 AM. |
12-11-2006, 04:26 PM | #2 |
Registered User
Join Date: Dec 2006
Location: Hatfield, PA
Posts: 9
|
Re: Hola from PA (Philly Area)
***Edited by Moderator***
I'll have to find out what cams/heads/etc. are on it, but it's got long headers, Edelbrock intake etc. on it that I no longer have any use for. Last edited by krue; 12-11-2006 at 10:23 PM. Reason: Non-subscriber For Sale |
12-11-2006, 06:07 PM | #3 |
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Hola from PA (Philly Area)
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
12-11-2006, 06:49 PM | #4 |
Next!
Join Date: Jan 2003
Location: Eastern Pa.
Posts: 2,483
|
Re: Hola from PA (Philly Area)
Welcome from over in Hilltown Township, Bucks County.
__________________
86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck |
12-11-2006, 10:22 PM | #5 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: Hola from PA (Philly Area)
Welcome to the board from South Mississippi! You'll need to subscribe and post WTB or For Sale threads on the parts board. Click the link in my sig for info on subscribing.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
12-12-2006, 12:04 AM | #6 |
Senior Member
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
|
Re: Hola from PA (Philly Area)
Welcome to the board from central Califorina!
__________________
Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 |
12-12-2006, 12:41 AM | #7 |
Born To Lose Club
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,307
|
Re: Hola from PA (Philly Area)
__________________
Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
12-12-2006, 02:16 AM | #8 |
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: Hola from PA (Philly Area)
Welcome from FT Worth TX.
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed Member of the patina club |
12-12-2006, 10:39 AM | #9 |
Registered User
Join Date: May 2006
Location: Dickson,Tn
Posts: 811
|
Re: Hola from PA (Philly Area)
Welcome from Ky
__________________
Pickles |
12-12-2006, 01:19 PM | #10 |
Post Whore
Join Date: Aug 2005
Location: Owensboro KY
Posts: 11,905
|
Re: Hola from PA (Philly Area)
to the board from KY!
__________________
Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons |
12-12-2006, 09:09 PM | #11 |
Account Suspended
Join Date: Dec 2005
Location: SPOKANE, WASHINGTON
Posts: 1,001
|
Re: Hola from PA (Philly Area)
from Washington State
|
12-12-2006, 10:40 PM | #12 |
ASE Certified Spoon Operator
Join Date: Oct 2006
Location: Colorado Springs, CO
Posts: 157
|
Re: Hola from PA (Philly Area)
Welcome from Colorado
...from a former Philly area resident, Bucks County/Doylestown... I miss WaWa hoagies and Rosenberger's iced tea
__________________
My six is bigger than your eight 67 K20 292 +.060" SM465 NP203 3.73s 86 4Runner, the daily on 31s 85 4Runner, the wheeler on 38s 92 x-cab truggy project for 2017... tons and 42s and V8 power |
12-12-2006, 11:33 PM | #13 |
Registered User
Join Date: Dec 2006
Location: Livermore, Ca
Posts: 10
|
Re: Hola from PA (Philly Area)
Welcome from cali !!
|
12-14-2006, 12:59 AM | #14 | |
Registered User
Join Date: Dec 2006
Location: Hatfield, PA
Posts: 9
|
Re: Hola from PA (Philly Area)
Quote:
Excellent! My house is about 3 blocks away from Rosenbergers (I'm in Hatfield). And as I can understand the Wawa hoagies aspect, there's nothing like Gino's! ;-) |
|
12-14-2006, 01:02 PM | #15 |
Registered User
Join Date: Feb 2006
Location: BC Canada
Posts: 3,606
|
Re: Hola from PA (Philly Area)
from Kelowna
__________________
2011 Chev Silverado LT 1500 4x4 Crew Cab 5.3l 2005 Toyota 4Runner family beater ...would have more but my yard ain't all that big... ..nothing like a Chevy fence all bought and paid for.. ...there's a few holes in it though... |
12-14-2006, 03:10 PM | #16 |
Born a Chevy Man
Join Date: Apr 2005
Location: Navarre, Florida
Posts: 10,221
|
Re: Hola from PA (Philly Area)
Welcome from Western Kentucky.
__________________
John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 *1986 Chevy SWB Silverado *1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS |
12-15-2006, 11:02 PM | #17 |
In Memoriam...
Join Date: Nov 2006
Location: Wallburg, NC
Posts: 1,216
|
Re: Hola from PA (Philly Area)
Welcome from Wallburg, NC.
__________________
'68 C10 SWB 307ci 2BBL FarmTruk Pics Here "You know, doing what is right is easy. The problem is knowing what is right." |
12-16-2006, 12:59 AM | #18 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: Hola from PA (Philly Area)
Welcome to the site from Indiana
|
12-16-2006, 06:35 AM | #19 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: Hola from PA (Philly Area)
From West TN
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
01-15-2007, 02:39 AM | #20 |
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: Hola from PA (Philly Area)
Welcome to the board from West Tennessee.
__________________
Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
Bookmarks |
|
|