do you have buckets from another vehicle? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jmac05 · 04-30-2002, 04:14 PM

Howdy,
Do you have buckest from another vehicle? If so what vehice make and Year. If you have pictures can you tell me where to find them?

------------------
Looking for bucket seats for '67 chevy

dubie · 04-30-2002, 04:15 PM

I have a set of buckets from an S-10 4x4. I haven't installed them yet, but i will be sure to post a pic once installed.

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.

Brad · 04-30-2002, 08:29 PM

yep, see this post... http://67-72chevytrucks.com/board/ub...ML/006595.html
...they have headrests too.
------------------
WOU in Monmouth, Or
68 Camaro,250(No,I'm not putting in a 350!)
67,LWB,250(Again, I'm not putting in a 350!)
a work in progress
"Praise The Lowered"

[This message has been edited by Brad (edited April 30, 2002).]

lofly'a · 04-30-2002, 08:45 PM

buckets from chevy trucks from 88-91 fit great because they fit under the rear window and don't have headrests. 92up fit good also if you don't mind the headrest protruding above the rear glass. they are fairly plentiful now too, at least in the south.

Longhorn Man · 04-30-2002, 09:08 PM

Only trouble with that swap is the deat is just a little too high. Otherwise, it is perfect.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

dmec · 05-01-2002, 01:53 AM

i used 6 way power seats from 85 pontiac grand am. power seats saves a lot of time trying to get height set right.

HvyChevy454 · 05-04-2002, 12:09 PM

these are out of a 91 chevy lumina minivan

------------------
Lutz, Fl
My Team Website
The Heavy Chevy Website
------------------

72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi
91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust
71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works...
Put it to the floor...

misfits · 05-04-2002, 01:15 PM

I have buckets from a dodge shelby ,one of those little hatchback ones, not sure what year.

tom hand · 05-04-2002, 03:20 PM

Buckets from trucks and blazers 73-[till they changed to highbacks]work well and can be made to look stock. 72 down brackets and covers can be made to fit,and they don't demand such a high price at the boneyard, I have gotten sets for free. The set in this truck have 72 houndtooth covers and bench seat brakets to make them sit at the correct height.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

cableguy0 · 05-04-2002, 03:44 PM

can the newer style buckets be easily adapted to fit our seat bracketry.

------------------
72 chevy lwb 350 lunati cam ported and polished cast 2.02 heads proform hei edelbrock performer rpm and 750 carb balanced bottom end 9.5:1 compression ps,pb th350 with a tci 2500 stall convertor full man v-body kevlar clutches and bands as well as other goodies

72chevyLWB · 05-04-2002, 11:10 PM

These are late 80's to early 90's Bonneville seats. No modifications to install, just drill holes.

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota
WANTED: Drop Spindles
F/S: rebuilt Turbo 400 & Aluminum wheels w/ tires

LeRoy · 05-05-2002, 02:01 AM

I've got a set of swivel buckets, probably out of an early Chevelle. Fit great in my beater blaz and comfy. I had to make up some brackets though

------------------
MOUNT VERNON, WASH. STATE
GOT MY BASES COVERED
-Big and bad 70 CST Blazer
-71 K5 Blazer, 350, 4spd, 2" lift, 35" BFG mudders, Camo,
-Work in progress 72 SWB
-72 Cheyenne, lwb, 1/2 ton, 4x4, V8, 4spd.
-71, 3/4 ton, 402/400, Custom Camper
-69, 2wd, ST6, auto, ghetto lowered, 3/4 ton, LWB, "BOMBER"
-69 Chev. short narrow 4x4
-69 Chev., lwb, utility trailer, 35" tires,
Add or Delete Daily

04-30-2002, 04:14 PM	#1
Jmac05 L.E.D. Tail lights, Baby! Join Date: Jan 2002 Location: Corona, Ca Posts: 290	do you have buckets from another vehicle? Howdy, Do you have buckest from another vehicle? If so what vehice make and Year. If you have pictures can you tell me where to find them? ------------------ Looking for bucket seats for '67 chevy __________________ *Prov 3:5-8* "Hook 'em" L.E.D. Taillights for sale NOW!!! If interested, visit: www.earlyclassic.com or our website: www.jmcled.com All 67-72 GM Taillights are on sale untill 5 p.m. on Dec 15th, with Guaranteed Christmas delivery! joel.mcwaters@jmcled.com

04-30-2002, 04:15 PM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	I have a set of buckets from an S-10 4x4. I haven't installed them yet, but i will be sure to post a pic once installed. ------------------ 72 C/10 LWB 2wd 250 inline 6, 3 speed column shift. Soon to have a total facelift. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-30-2002, 08:29 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	yep, see this post... http://67-72chevytrucks.com/board/ub...ML/006595.html ...they have headrests too. ------------------ WOU in Monmouth, Or 68 Camaro,250(No,I'm not putting in a 350!) 67,LWB,250(Again, I'm not putting in a 350!) a work in progress "Praise The Lowered" [This message has been edited by Brad (edited April 30, 2002).] __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-30-2002, 08:45 PM	#4
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	buckets from chevy trucks from 88-91 fit great because they fit under the rear window and don't have headrests. 92up fit good also if you don't mind the headrest protruding above the rear glass. they are fairly plentiful now too, at least in the south. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

05-04-2002, 12:09 PM	#7
HvyChevy454 Slowly getting CRSS... Join Date: Jul 2001 Location: Lutz, Florida Posts: 656	these are out of a 91 chevy lumina minivan ------------------ Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Put it to the floor... __________________ -Nic Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Performer RPM Intake 750 cfm carb Comp Cam 268/.495 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Speak Softly and Carry A Big Block... There is No replacement for Displacement... "If everything seems under control, you're just not going fast enough." - Mario Andretti

04-30-2002, 09:08 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Only trouble with that swap is the deat is just a little too high. Otherwise, it is perfect. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

05-01-2002, 01:53 AM	#6
dmec Senior Member Join Date: Jun 2000 Location: yucaipa ca Posts: 580	i used 6 way power seats from 85 pontiac grand am. power seats saves a lot of time trying to get height set right.

05-04-2002, 01:15 PM	#8
misfits Registered User Join Date: Feb 2001 Location: Sturgeon Bay , WI USA Posts: 375	I have buckets from a dodge shelby ,one of those little hatchback ones, not sure what year.

05-04-2002, 03:20 PM	#9
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Buckets from trucks and blazers 73-[till they changed to highbacks]work well and can be made to look stock. 72 down brackets and covers can be made to fit,and they don't demand such a high price at the boneyard, I have gotten sets for free. The set in this truck have 72 houndtooth covers and bench seat brakets to make them sit at the correct height. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-04-2002, 03:44 PM	#10
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	can the newer style buckets be easily adapted to fit our seat bracketry. ------------------ 72 chevy lwb 350 lunati cam ported and polished cast 2.02 heads proform hei edelbrock performer rpm and 750 carb balanced bottom end 9.5:1 compression ps,pb th350 with a tci 2500 stall convertor full man v-body kevlar clutches and bands as well as other goodies __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

05-04-2002, 11:10 PM	#11
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	These are late 80's to early 90's Bonneville seats. No modifications to install, just drill holes. ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota WANTED: Drop Spindles F/S: rebuilt Turbo 400 & Aluminum wheels w/ tires __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-05-2002, 02:01 AM	#12
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	I've got a set of swivel buckets, probably out of an early Chevelle. Fit great in my beater blaz and comfy. I had to make up some brackets though ------------------ MOUNT VERNON, WASH. STATE GOT MY BASES COVERED -Big and bad 70 CST Blazer -71 K5 Blazer, 350, 4spd, 2" lift, 35" BFG mudders, Camo, -Work in progress 72 SWB -72 Cheyenne, lwb, 1/2 ton, 4x4, V8, 4spd. -71, 3/4 ton, 402/400, Custom Camper -69, 2wd, ST6, auto, ghetto lowered, 3/4 ton, LWB, "BOMBER" -69 Chev. short narrow 4x4 -69 Chev., lwb, utility trailer, 35" tires, Add or Delete Daily __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.