Vintage air question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AKChevyman · 01-17-2007, 10:10 PM

I don't have the cash to purchase my Vintage air sure fit setup yet but I want to mod the fire wall for the bulk head I can get the specs for that off the web but not the posisiton where I need to punch the hole in the fire wall this is what My fire wall looks like now if anyone knows where to find the specs on the position of the bulkhead that would be great thank you

jugernot · 01-17-2007, 11:33 PM

you can down load the instruction manuals from thier web site.

http://www.vintageair.com/downloads.asp

ghetto_superman · 01-18-2007, 02:50 AM

but it think it says that the designs are not meant for 'pre cutting' .. take from that what you will.. i simply ordered my bulkhead ahead of time to be sure it will fit where i want it to. i heard somewhere that if you pry buy some of the pieces (ie- bulkhead) then they take that out of the package and price later if you get the whole kit. but i might be on drugs i dunno. lol.

Joe67 · 01-18-2007, 08:17 AM

I agree, wait until you have the unit in hand. I'm planning to mount mine as low as possible.

Rokcrln · 01-18-2007, 08:23 AM

You can also go with their universal fit unit or hot rod unit and run you lines any where you want. With their sure fit system is that not the one designed just for our truck? If so than it has the four lines that pop right thru the front of the fire wall and they do very from unit to unit. I universal fit unit you could run you lines out the pass side kick panel area if you were so inclined

Oh and nice dolly by the way! Has it made life easier for you yet?

Kevin
LFD Inc.

AKChevyman · 01-18-2007, 08:43 AM

the dolly works great it made getting the cab primed easy as hell and I even adapted it to work with my 8 ft bed with just a simple mod I can't tip it forward or back but side to side is no problem. Thank you all for the coments I guess I will just wait to get the kit I want before cutting the hole or routing the lines. I still need to do body work so I have time to save up to the bed if it ever gets warmer here I will get to blast the bed but the bottom pic show some of the stuff I have done to the bed so far.

01-17-2007, 10:10 PM	#1
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Vintage air question I don't have the cash to purchase my Vintage air sure fit setup yet but I want to mod the fire wall for the bulk head I can get the specs for that off the web but not the posisiton where I need to punch the hole in the fire wall this is what My fire wall looks like now if anyone knows where to find the specs on the position of the bulkhead that would be great thank you Attached Images __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

01-17-2007, 11:33 PM	#2
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Vintage air question you can down load the instruction manuals from thier web site. http://www.vintageair.com/downloads.asp __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

01-18-2007, 02:50 AM	#3
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: Vintage air question but it think it says that the designs are not meant for 'pre cutting' .. take from that what you will.. i simply ordered my bulkhead ahead of time to be sure it will fit where i want it to. i heard somewhere that if you pry buy some of the pieces (ie- bulkhead) then they take that out of the package and price later if you get the whole kit. but i might be on drugs i dunno. lol. __________________ -1947 3100 -1968 C10 -1970 K20

01-18-2007, 08:17 AM	#4
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: Vintage air question I agree, wait until you have the unit in hand. I'm planning to mount mine as low as possible. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

01-18-2007, 08:23 AM	#5
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Vintage air question You can also go with their universal fit unit or hot rod unit and run you lines any where you want. With their sure fit system is that not the one designed just for our truck? If so than it has the four lines that pop right thru the front of the fire wall and they do very from unit to unit. I universal fit unit you could run you lines out the pass side kick panel area if you were so inclined Oh and nice dolly by the way! Has it made life easier for you yet? Kevin LFD Inc.

01-18-2007, 08:43 AM	#6
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: Vintage air question the dolly works great it made getting the cab primed easy as hell and I even adapted it to work with my 8 ft bed with just a simple mod I can't tip it forward or back but side to side is no problem. Thank you all for the coments I guess I will just wait to get the kit I want before cutting the hole or routing the lines. I still need to do body work so I have time to save up to the bed if it ever gets warmer here I will get to blast the bed but the bottom pic show some of the stuff I have done to the bed so far. Attached Images __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.