radiator hose location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ampsyco · 10-28-2006, 03:11 PM

i've got a 70 gmc 1500 2wd pickup. my lower radiator hose sits on the frame. enough to be wearing into it. i got a new hose today and lt looks like the radiator i've got in there might be incorrect. the diameter of the hose is much larger than the diameter of the inlet of the radiator. also it looks like the inlet should be up about 6 or 7 inches from the base of the radiator. mines right at the bottom.

anyone have any pics of their radiator ?? or can someone tell me if their inlet is higher up than right at the bottom ?? mines a manual trans no ac but i dont think that really makes a difference where the hoses are located.

any help would be greatly appreciated.

Longhorn Man · 10-28-2006, 05:40 PM

Does your lower neck go straight out, or does it angle up.
The latter is correct.

ampsyco · 10-28-2006, 10:21 PM

mine goes straight out. so its supposed to have a bend i guess ???

Longhorn Man · 10-28-2006, 10:57 PM

yep, you have the wrong rad.
I have installed the rad from a later 73-87 truck, and it sounds like yours has been too, but what I did was cut the lower neck off the old rad, and had the rad shop braze that on replaceing the straight verson.

*trkklr77* · 10-28-2006, 11:06 PM

i have had that problem on my 77 as well, i take the old hose and cut out the offending section, cut that like a hot dog bun and wrap it around the new hose at the rub point.

junkyardjohn · 10-29-2006, 07:06 AM

THATS WHAT I DO. ZIP-TIE A 6 OR 8" SECTION OF OLD HOSE OVER THE SPOT THAT RUBS ON THE FRAME.

JOHN

TDs6t9 · 10-30-2006, 05:30 PM

Thank for the idea of the old hose. Just put a new one on this afternoon and wondering about what to do where it hits the frame. Great idea with the old hose. Thanks again!!

RShaips · 01-23-2007, 10:11 AM

Well , you guys know everything! I was trying to buy a bottom radiator hose yesterday and both places I went had a different hose than I needed. I must also have a newer radiator in mine. The guy I bought mine from had several zip ties wrapped around the hose where it rubs the frame. So I guess I need a hose from a 73-77 truck? I will check today and also buy a larger piece to put on the outside. Thanks

Longhorn Man · 01-23-2007, 03:56 PM

hose from 73 - 87 truck won't help, the frame is still in the way if your lower neck goes straight out.

crazy longhorn · 01-23-2007, 07:40 PM

Quote:

Originally Posted by Longhorn Man

hose from 73 - 87 truck won't help, the frame is still in the way if your lower neck goes straight out.

If you have a 73 up waterpump, that lower hose will fit the old truck /with the late (straightneck radiator). mine is setup that way..... However, if you try to stuff that late lower hose on the early waterpump, it will make you crazy (been there , tryed that)

L

10-28-2006, 03:11 PM	#1
ampsyco Registered User Join Date: Aug 2006 Location: florida Posts: 142	radiator hose location i've got a 70 gmc 1500 2wd pickup. my lower radiator hose sits on the frame. enough to be wearing into it. i got a new hose today and lt looks like the radiator i've got in there might be incorrect. the diameter of the hose is much larger than the diameter of the inlet of the radiator. also it looks like the inlet should be up about 6 or 7 inches from the base of the radiator. mines right at the bottom. anyone have any pics of their radiator ?? or can someone tell me if their inlet is higher up than right at the bottom ?? mines a manual trans no ac but i dont think that really makes a difference where the hoses are located. any help would be greatly appreciated.

10-28-2006, 05:40 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: radiator hose location Does your lower neck go straight out, or does it angle up. The latter is correct.

10-28-2006, 10:21 PM	#3
ampsyco Registered User Join Date: Aug 2006 Location: florida Posts: 142	Re: radiator hose location mine goes straight out. so its supposed to have a bend i guess ???

10-28-2006, 10:57 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: radiator hose location yep, you have the wrong rad. I have installed the rad from a later 73-87 truck, and it sounds like yours has been too, but what I did was cut the lower neck off the old rad, and had the rad shop braze that on replaceing the straight verson.

10-28-2006, 11:06 PM	#5
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: radiator hose location i have had that problem on my 77 as well, i take the old hose and cut out the offending section, cut that like a hot dog bun and wrap it around the new hose at the rub point.

10-29-2006, 07:06 AM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: radiator hose location THATS WHAT I DO. ZIP-TIE A 6 OR 8" SECTION OF OLD HOSE OVER THE SPOT THAT RUBS ON THE FRAME. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

10-30-2006, 05:30 PM	#7
TDs6t9 Registered User Join Date: Apr 2005 Location: Portsmouth, VA Posts: 59	Re: radiator hose location Thank for the idea of the old hose. Just put a new one on this afternoon and wondering about what to do where it hits the frame. Great idea with the old hose. Thanks again!!

01-23-2007, 10:11 AM	#8
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: radiator hose location Well , you guys know everything! I was trying to buy a bottom radiator hose yesterday and both places I went had a different hose than I needed. I must also have a newer radiator in mine. The guy I bought mine from had several zip ties wrapped around the hose where it rubs the frame. So I guess I need a hose from a 73-77 truck? I will check today and also buy a larger piece to put on the outside. Thanks

01-23-2007, 03:56 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: radiator hose location hose from 73 - 87 truck won't help, the frame is still in the way if your lower neck goes straight out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.