parts for sale: South central KY

[Blue_71]

1978 350 truck motor, short block, dissassembled, newer cam, no lifters. needs rebuilt, kit is only $170. $150 as is.

1987 305 camaro short block roller motor, needs cam/lifters and a re-ring kit, been sitting a while so its locked up but can be taken apart, $75 as is

1980 chevy 305 short block, disassembled, out of a 1/2 ton truck. was running in my 71 1/2 ton untill the cam flattened a lobe, $100 obo

1987 305 TBI heads, off a camaro, 1.8/1.5 valves, dissassembled, needs valve seals. $65 as is,can have valves lapped, new seals,
and reassembled for another $50 plus cost of seals.

may have a set of 993 heads (1.94/1.5 valves) that can be included with the 350 for $65 more or will sell seperate for same price. needs valve seals, will make same deal as on 305 heads for lapping the valves and installing the new seals.

more to come in a day or two!

[Blue_71]

round two:

1998 350 crank, 1 peice rear main, has one spun rod bearing, $15

327 pistons, full set, good shape, $35

67 chevy radiator support, driver shape, "shelf" under battery needs help, $50

1970 cab top, no rust, can be cut to wherever you want, $75. or take the whole cab same price (floor is junk)

all prices are obo, and i prefer to not ship the larger stuff but i will help with getting it moved however i can

[5150]

hey blue,

Can I get a pic of the radiator support?

[Blue_71]

ill get pics in the morning- more stuff to be listed too when i "inventory" the building

heres a few more things:

gauge panels, couple gauges ones and non-- none of them are show quality, but there arent any cracks. they're all disassembled right now, not sure of worth but for "rules" sake, we'll say $30 per complete gauges gauge panel, $20 per base model. or will sell parts from them.

wiper arms, $7 shipped per arm, $10 shipped per pair

malibu? steering wheel, with horn cap, $20

automatic steering column "tube", $10

grant 3 spoke chrome wheel, 3 holes in each spoke, with install kit, $35

[Blue_71]

hey yellow- sorry about not getting pics yet, girlfriend left her camera at work and she was off today. i dug the support out, its not in as good of shape as i remembered.. its like most, no right shelf. after finding that, ill sell it to you for $25 if you pick it up, $35 and ill weld in a flat panel you can drill 3 holes in to bolt the inner fender on. ill get you pics tomarow afternoon when she gets home.


heres more stuff:

250 CI I6 engine re-ring kit, $100

LH front 68 chev, 68-72 gmc fender, one dent, $65

both front 67 chevy/gmc fenders, more or less patch panel donors, $20 for the pair

[faribran]

tell me more about the 327 pistons... how old.?.. flat top ? do you have pics?

[Blue_71]

heres pics of the rad. support:

[Blue_71]

rad support round 2, start of 327 pistons

[Blue_71]

last 5 of pistons, these are stock 68 327 pistons, but i have no clue if they are actually 1968 vintage. they were only taken out because the engine was bored .030. all the oil control grooves are still there, they would clean up really good. the bearing caps are marked as to where they went

[Blue_71]

ttt

[lilpup69chevy]

where exactly in kentucky are you? i'm in sikeston missouri 63801 and if i'm close enough i might be interested in some stuff

[Blue_71]

Glasgow, KY 42141...
40 miles west of bowling green, ky. 100 miles south of louisville, ky, 100ish north of nashville, tn, 300ish south of indianapolis, in

according to randmcnally.com, im 305 miles from you. i could possibly meet you up to 75-100 miles from me, for a small delivery fee (30 cents/mile)

[faribran]

Blue,
thanks for posting pics of the pistons.....
they appear to have a dished top....
the skirts look good..

[Blue_71]

yup- factory dish as far as i know, good skirts


another part i forgot-

70 chevy hood, good shape, maybe a few small small (dime size) dings on top, $30

[Blue_71]

ttt