250 power steering help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 11-03-2006, 10:29 AM

I am in need of a picture of how the power steering brackets mount on a 250
ANY help would be great thanks

**slepysal** · 11-03-2006, 11:00 PM

blaaaaaaaaaaaa no one ?

**Ron 586** · 11-03-2006, 11:16 PM

Good luck with your search. I have a 1974 short fleet with a I-250 in it that I'm going to put power steering on but I need brackets and pulleys besides knowing where they go. The sad thing is I should have a set off a 1978 camaro I stripped to make a race car. Now to find them.

pugs · 11-04-2006, 09:19 PM

let me know if ya still need a pic of p/s brackets i have 2 81's here w/ p/s

**slepysal** · 11-05-2006, 12:21 AM

Quote:

Originally Posted by pugs

let me know if ya still need a pic of p/s brackets i have 2 81's here w/ p/s

Pugs that would be a great help !!!!

pugs · 11-05-2006, 08:10 AM

Will have pics later today for you guys

**Palf70Step** · 11-05-2006, 11:06 AM

Thse might help. They are the only ones I have from the 82 I had with a 250.

One thing to remember is there is slight differences in the hardware depending on whether the 250 is an integrated head or not. My 82 was integrated head. the brackets mount to the head, where as the older engines with the separate intake & head mount to the block. The newer blocks don't had the mounts to put the earlier stuff on. Also, the crank and water pump pulleys are slight different. On the newer ones the crank pulley has a slight gap between groove 1 and groove two, while the earlier ones are right next to each other.

That is all i can remember at the moment. I found all this out when I was attempting to take the 250 out of my 70 and put in the 82.

**slepysal** · 11-07-2006, 09:51 PM

please dont flame me !!! dose any onre have 250 p/s brakeets for sale??? I need the earlier non integrated head type. This is all I need for my p/s swap !!!

**slepysal** · 11-15-2006, 10:42 PM

Quote:

Originally Posted by pugs

Will have pics later today for you guys

did you get any pics yet? thanks

**Ron 586** · 11-16-2006, 04:36 PM

I had forgotten about this thread with all the other stuff going on. I have not even had a chance to look for the ones I know I have but they will be for the one piece head on a 78 camaro. Sorry I'm no help.

tyjoja · 01-26-2007, 02:17 AM

did you ever find the brackets? I have a 73 sw with I-6 and have everything for my conversion except the brackets and have had zero luck finding them anywhere.

11-03-2006, 10:29 AM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	250 power steering help I am in need of a picture of how the power steering brackets mount on a 250 ANY help would be great thanks

11-03-2006, 11:00 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 250 power steering help blaaaaaaaaaaaa no one ?

11-03-2006, 11:16 PM	#3
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: 250 power steering help Good luck with your search. I have a 1974 short fleet with a I-250 in it that I'm going to put power steering on but I need brackets and pulleys besides knowing where they go. The sad thing is I should have a set off a 1978 camaro I stripped to make a race car. Now to find them. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

11-04-2006, 09:19 PM	#4
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: 250 power steering help let me know if ya still need a pic of p/s brackets i have 2 81's here w/ p/s __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

11-05-2006, 08:10 AM	#6
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	Re: 250 power steering help Will have pics later today for you guys __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

11-05-2006, 11:06 AM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 250 power steering help Thse might help. They are the only ones I have from the 82 I had with a 250. One thing to remember is there is slight differences in the hardware depending on whether the 250 is an integrated head or not. My 82 was integrated head. the brackets mount to the head, where as the older engines with the separate intake & head mount to the block. The newer blocks don't had the mounts to put the earlier stuff on. Also, the crank and water pump pulleys are slight different. On the newer ones the crank pulley has a slight gap between groove 1 and groove two, while the earlier ones are right next to each other. That is all i can remember at the moment. I found all this out when I was attempting to take the 250 out of my 70 and put in the 82. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-07-2006, 09:51 PM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 250 power steering help please dont flame me !!! dose any onre have 250 p/s brakeets for sale??? I need the earlier non integrated head type. This is all I need for my p/s swap !!! Last edited by slepysal; 11-07-2006 at 09:52 PM.

11-16-2006, 04:36 PM	#10
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: 250 power steering help I had forgotten about this thread with all the other stuff going on. I have not even had a chance to look for the ones I know I have but they will be for the one piece head on a 78 camaro. Sorry I'm no help. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

01-26-2007, 02:17 AM	#11
tyjoja Registered User Join Date: Jan 2007 Location: albany oregon Posts: 168	Re: 250 power steering help did you ever find the brackets? I have a 73 sw with I-6 and have everything for my conversion except the brackets and have had zero luck finding them anywhere.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.