Complete rolling chassis for 78 2WD C10 long bed - lowered - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7T2 · 01-21-2007, 11:58 PM

I have a complete rolling chassis for a 1978 C10 2WD long bed truck. It includes the frame, suspension (no shocks), steering, rear differential and wheels with tires good enough to move it around on. The front suspension has tubular lower control arms and has been lowered either through the control arms, spindles or springs (most likely the springs, but I don't know for sure). Rear has a boxed section with a welded in C notch and the axle is flipped on top of the springs. Not sure what the gear ratio is in the diff but it looks close to 3.00 to 1 when you roll the chassis around. Frame has been sandblasted and painted, but needs to be touched up from sitting outside. No rust besides slight surface rust from sitting outside. Has gas tank mounts (saddle tanks)

Asking $500 or best offer.

wedgemon · 01-22-2007, 01:32 PM

Why can't it be closer to here??

bagged91 · 01-25-2007, 07:45 PM

If you decide to part, I would be interested in the lowering components... Let me know.

L8R - Joe

mike63078 · 01-26-2007, 11:44 AM

was wondering if you still had this. sent a PM

7T2 · 01-26-2007, 05:36 PM

Quote:

Originally Posted by mike63078

was wondering if you still had this. sent a PM

gone

01-21-2007, 11:58 PM	#1
7T2 Active Member Join Date: Dec 2004 Location: Marysville, OH Posts: 667	Complete rolling chassis for 78 2WD C10 long bed - lowered - Central Ohio I have a complete rolling chassis for a 1978 C10 2WD long bed truck. It includes the frame, suspension (no shocks), steering, rear differential and wheels with tires good enough to move it around on. The front suspension has tubular lower control arms and has been lowered either through the control arms, spindles or springs (most likely the springs, but I don't know for sure). Rear has a boxed section with a welded in C notch and the axle is flipped on top of the springs. Not sure what the gear ratio is in the diff but it looks close to 3.00 to 1 when you roll the chassis around. Frame has been sandblasted and painted, but needs to be touched up from sitting outside. No rust besides slight surface rust from sitting outside. Has gas tank mounts (saddle tanks) Asking $500 or best offer. Attached Images Last edited by 7T2; 06-13-2012 at 01:10 PM.

01-22-2007, 01:32 PM	#2
wedgemon Registered User Join Date: Jul 2004 Location: Spanish Springs, NV Posts: 1,171	Re: Complete rolling chassis for 78 2WD C10 long bed - lowered Why can't it be closer to here?? __________________ 2003 Silverado K1500 Z71 - Arrival Blue 1973 K5 Cheyenne Blazer 350/TH350/NP203 Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift. RETIRED: 1980 Scottsdale 4x4 Founding Member: "TILT WHEEL BELLY." Club Last edited by wedgemon; 01-22-2007 at 01:32 PM.

01-25-2007, 07:45 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: Complete rolling chassis for 78 2WD C10 long bed - lowered If you decide to part, I would be interested in the lowering components... Let me know. L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-26-2007, 11:44 AM	#4
mike63078 Registered User Join Date: Mar 2003 Location: Horsham PA Posts: 153	Re: Complete rolling chassis for 78 2WD C10 long bed - lowered was wondering if you still had this. sent a PM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.