Power Steering Hoses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dingo_dan_22 · 01-26-2007, 12:22 AM

I just threw on a PS Gear Box and I got the hoses for a 74' (Same as Pump & Box) I was looking at the thing and I'm wondering if it will fit. It seems too long, and too many kinks.

What have you guys used for a hose?

Also I'm thinking I'll have to cut out part of the inner fender.

dingo_dan_22 · 01-26-2007, 12:34 AM

Here's Some Pics

jimmydean · 01-26-2007, 12:37 AM

My pump and box came off a '75 and it fit perfect. I did cut my inner fender just a little for better clearance of the lines right above the box.

dingo_dan_22 · 01-26-2007, 01:08 AM

Thanks. Did You use a pressure hose for a 75'?

jimmydean · 01-26-2007, 01:42 AM

Yes, I pulled the motor with the pump attached and installed it, then pulled my old box and replaced it with the box off the '75. I used the lines and everything off the '75.

Southedisto · 01-26-2007, 08:53 AM

Try advance for pn 70917

short step · 01-27-2007, 01:08 PM

i just cut the inner fender also,and just hooked it up works fine
bob

dingo_dan_22 · 01-27-2007, 02:06 PM

thanks guys

01-26-2007, 12:22 AM	#1
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Power Steering Hoses I just threw on a PS Gear Box and I got the hoses for a 74' (Same as Pump & Box) I was looking at the thing and I'm wondering if it will fit. It seems too long, and too many kinks. What have you guys used for a hose? Also I'm thinking I'll have to cut out part of the inner fender. __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

01-26-2007, 12:34 AM	#2
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Power Steering Hoses Here's Some Pics Attached Images __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

01-26-2007, 12:37 AM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Power Steering Hoses My pump and box came off a '75 and it fit perfect. I did cut my inner fender just a little for better clearance of the lines right above the box.

01-26-2007, 01:08 AM	#4
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Power Steering Hoses Thanks. Did You use a pressure hose for a 75'? __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

01-26-2007, 01:42 AM	#5
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Power Steering Hoses Yes, I pulled the motor with the pump attached and installed it, then pulled my old box and replaced it with the box off the '75. I used the lines and everything off the '75.

01-26-2007, 08:53 AM	#6
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Power Steering Hoses Try advance for pn 70917 __________________ I like wheelin in Dixie!

01-27-2007, 01:08 PM	#7
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: Power Steering Hoses i just cut the inner fender also,and just hooked it up works fine bob

01-27-2007, 02:06 PM	#8
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Power Steering Hoses thanks guys __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.