FS/ 6 cylinder parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 01-21-2007, 11:38 PM

Chrome valve cover for 250 or 292, a few slight dings and scratches, good driver quality. 28.00 shipped.

Hei distributer, this one has a wire for external coil, looks like its the same dist. as the incap coil unit thou, with cap, retainr and wires. 40.00 shipped.

Hei distributer. 40.00 shipped

Various brackets, let me know if theres something in this lot your interested in, I'm not sure whar alot of these are for or the years.

Carbs, 20.00 each plus shipping or all for 60.00 shipped.

qksilver · 01-21-2007, 11:41 PM

I am interested in the brackets but not sure what i need for my 292. Is there any way you can email pix so i can compare to the assembly manual.
What I am interested in are the big brackets
thanks,
Steve
SCJKOVACH@AOL.COM

BLAZERMAN · 01-21-2007, 11:55 PM

I believe the big brackets are later model alternator brackets, I'll try and get better pics tomorrow.

Brad · 01-22-2007, 12:26 AM

What do you want for the parts circled in red? How about green? Can you get better pics of the parts in green?

BLAZERMAN · 01-22-2007, 11:45 PM

Sorry, I didnt get home in time to get pics taken but will have them here tuesday night.

**PICKMUP** · 01-23-2007, 01:39 AM

Put me third in line for the parts in red...just to see what happens with the pics & prices.

arkracing · 01-23-2007, 08:52 AM

How much for the throttle/kickdown cable bracket that is circled. + Shipping?
Thanks

BLAZERMAN · 01-24-2007, 12:09 AM

Hopefully these pics are a little better.
Either of the big brackets. 28.00 shipped
Throtle bracket 15.00 shipped
Adjusted prices on the rest.

**PICKMUP** · 01-24-2007, 10:18 PM

Send me a PM if you get to me...I may not get to check this post again...thanks

Brad · 01-25-2007, 02:21 AM

Blazerman, I'll take both large brackets and the water intake housing as well as the kickdown bracket if Arkracing doesn't want it. I'll send you a PM.

BLAZERMAN · 01-25-2007, 08:35 AM

Quote:

Originally Posted by Brad

Blazerman, I'll take both large brackets and the water intake housing as well as the kickdown bracket if Arkracing doesn't want it. I'll send you a PM.

Brad, I'll give qksilver and akracing till tonite and see if they are interested and then get back with you.

72swbcamo · 01-25-2007, 08:43 AM

I'm interested ni one of the big brackets if one is still availble and also the throttle bracket with the solenoid attached. Please let me know what is still available and pm me your paypal address or i can send a MO. Thanks

**70STOVEBOLT** · 01-25-2007, 01:13 PM

Is the right front carb in good working condition or does it need rebuilt? Could you get some better pics of that one? Also, how much for the valve cover and the carb, shipped to business zip 46562? And how do you prefer to be paid?
Thanks,
Stovebolt

arkracing · 01-25-2007, 10:06 PM

I'm still interested in the kickdown -

PM sent

**PICKMUP** · 01-28-2007, 11:43 PM

I understand you did get down to me. If that is so, as you said in your PM, I will buy the two big brackets (small brace w/one).
Give me payment details and I will take care of it.
Thanks, Frank

BLAZERMAN · 01-29-2007, 12:50 AM

Sent you a PM.

01-21-2007, 11:38 PM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	FS/ 6 cylinder parts Chrome valve cover for 250 or 292, a few slight dings and scratches, good driver quality. 28.00 shipped. Hei distributer, this one has a wire for external coil, looks like its the same dist. as the incap coil unit thou, with cap, retainr and wires. 40.00 shipped. Hei distributer. 40.00 shipped Various brackets, let me know if theres something in this lot your interested in, I'm not sure whar alot of these are for or the years. Carbs, 20.00 each plus shipping or all for 60.00 shipped. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 01-24-2007 at 12:12 AM.

01-21-2007, 11:41 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: FS/ 6 cylinder parts I am interested in the brackets but not sure what i need for my 292. Is there any way you can email pix so i can compare to the assembly manual. What I am interested in are the big brackets thanks, Steve SCJKOVACH@AOL.COM

01-21-2007, 11:55 PM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FS/ 6 cylinder parts I believe the big brackets are later model alternator brackets, I'll try and get better pics tomorrow. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

01-22-2007, 12:26 AM	#4
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: FS/ 6 cylinder parts What do you want for the parts circled in red? How about green? Can you get better pics of the parts in green? Attached Images __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-22-2007, 11:45 PM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FS/ 6 cylinder parts Sorry, I didnt get home in time to get pics taken but will have them here tuesday night. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

01-23-2007, 01:39 AM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: FS/ 6 cylinder parts Put me third in line for the parts in red...just to see what happens with the pics & prices.

01-23-2007, 08:52 AM	#7
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: FS/ 6 cylinder parts How much for the throttle/kickdown cable bracket that is circled. + Shipping? Thanks Attached Images __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

01-24-2007, 12:09 AM	#8
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FS/ 6 cylinder parts Hopefully these pics are a little better. Either of the big brackets. 28.00 shipped Throtle bracket 15.00 shipped Adjusted prices on the rest. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 01-24-2007 at 12:10 AM.

01-24-2007, 10:18 PM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: FS/ 6 cylinder parts Send me a PM if you get to me...I may not get to check this post again...thanks

01-25-2007, 02:21 AM	#10
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: FS/ 6 cylinder parts Blazerman, I'll take both large brackets and the water intake housing as well as the kickdown bracket if Arkracing doesn't want it. I'll send you a PM. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-25-2007, 08:43 AM	#12
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: FS/ 6 cylinder parts I'm interested ni one of the big brackets if one is still availble and also the throttle bracket with the solenoid attached. Please let me know what is still available and pm me your paypal address or i can send a MO. Thanks Last edited by 72swbcamo; 01-25-2007 at 08:44 AM.

01-25-2007, 01:13 PM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,258	Re: FS/ 6 cylinder parts Is the right front carb in good working condition or does it need rebuilt? Could you get some better pics of that one? Also, how much for the valve cover and the carb, shipped to business zip 46562? And how do you prefer to be paid? Thanks, Stovebolt __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-25-2007, 10:06 PM	#14
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: FS/ 6 cylinder parts I'm still interested in the kickdown - PM sent __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

01-28-2007, 11:43 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: FS/ 6 cylinder parts I understand you did get down to me. If that is so, as you said in your PM, I will buy the two big brackets (small brace w/one). Give me payment details and I will take care of it. Thanks, Frank

01-29-2007, 12:50 AM	#16
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FS/ 6 cylinder parts Sent you a PM. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.