Passenger side turn signal problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lukecp · 05-05-2002, 09:37 PM

Well, my passenger side turn signals dont work at all. When i move the lever to put them on, they don't blink, the indicator dosne't make a clicking noise, and the little arrow in the dashboard stays green, instead of blinking. The driver's side work fine, and everything flashes, including the passenger side, when i put on the hazard lights. I yanked off the steering wheel, and the turn signal cam looks OK. Is my switch shot? Should i got to the Chevy dealer to get a AC delco one, or will a parts store one work just as good? Thanks for the help!

------------------
Lucas

"Another proud owner of one of the coolest trucks ever built"

drop_shift@hotmail.com

My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, roughly 300 HP thanks to a 204/214 duration cam, Edelbrock Performer intake and 1406 carb, headers, and 40 seires Flowmaster mufflers. Ochre with a white top. Lots of fun

.

Longhorn Man · 05-05-2002, 09:43 PM

Are all your bulbs good? (check the obviouse)

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Benrs86 · 05-05-2002, 09:45 PM

usually when the little green light stays on you have a burned out bulb. and when the green thing stays off it is usually your flasher fuse deal. but thats all i could think of, good luck, Ben

lukecp · 05-05-2002, 09:50 PM

Yes the blulbs are fine, since all my marker lights on both sides flash when i turn on when the hazards are on. But when i try to use it to turn right, the green idicator lights dosent flash, but stays on, the indicator dosen't make the "tick-tick-tick" noise, and the right hand lights don't blink.

chevy2racr · 05-05-2002, 09:56 PM

is it a ground somewhere? both my signals flash until I push on the brake then the indicator goes slolid. .anyideahere?
Bryce

Longhorn Man · 05-05-2002, 10:32 PM

It'll be in your wiring somewhere most likely. You only have one blinker assembly, and if one works, the trouble is elsewhere. (the tic tock piece in your fuse box)
i wouldn't be suprised it it was the switch assembly, I've seen them do some real crazy things.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

05-05-2002, 09:37 PM	#1
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Passenger side turn signal problems Well, my passenger side turn signals dont work at all. When i move the lever to put them on, they don't blink, the indicator dosne't make a clicking noise, and the little arrow in the dashboard stays green, instead of blinking. The driver's side work fine, and everything flashes, including the passenger side, when i put on the hazard lights. I yanked off the steering wheel, and the turn signal cam looks OK. Is my switch shot? Should i got to the Chevy dealer to get a AC delco one, or will a parts store one work just as good? Thanks for the help! ------------------ Lucas "Another proud owner of one of the coolest trucks ever built" drop_shift@hotmail.com My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, roughly 300 HP thanks to a 204/214 duration cam, Edelbrock Performer intake and 1406 carb, headers, and 40 seires Flowmaster mufflers. Ochre with a white top. Lots of fun . __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

05-05-2002, 09:45 PM	#3
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	usually when the little green light stays on you have a burned out bulb. and when the green thing stays off it is usually your flasher fuse deal. but thats all i could think of, good luck, Ben __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

05-05-2002, 09:50 PM	#4
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Yes the blulbs are fine, since all my marker lights on both sides flash when i turn on when the hazards are on. But when i try to use it to turn right, the green idicator lights dosent flash, but stays on, the indicator dosen't make the "tick-tick-tick" noise, and the right hand lights don't blink. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

05-05-2002, 09:56 PM	#5
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	is it a ground somewhere? both my signals flash until I push on the brake then the indicator goes slolid. .anyideahere? Bryce __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

05-05-2002, 09:43 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Are all your bulbs good? (check the obviouse) ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

05-05-2002, 10:32 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	It'll be in your wiring somewhere most likely. You only have one blinker assembly, and if one works, the trouble is elsewhere. (the tic tock piece in your fuse box) i wouldn't be suprised it it was the switch assembly, I've seen them do some real crazy things. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.