New Carb Time?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70sChevys · 11-14-2002, 11:45 AM

About a month ago, my truck started running rough when I started it up first thing in the morning...sounded like it wasn't getting gas, so I popped the hood and found the carb was leaking from the top and the front two bolts were loose. (It's a Q-jet)....this fixed it and I drove off. This morning it did the same thing and tightening the bolts didn't help....it wouldn't start. I'm going to try and prime it to start it and check the other bolts, but I'm wondering if there's anything else easy to replace that will solve the problem...if not I'm gonna get a 1406 Edelbrock for it.

So for you carb guys....what can I check to fix it (I could really use the $250 elsewhere!).

BigRed · 11-14-2002, 12:52 PM

Sorry, I'm dumb when it comes to carbs. I've seen that Jegs sells rebuild Edelbrocks for $180. Here's the link.

http://www.jegs.com/cgi-bin/ncommerc...13&prmenbr=361

It will save you about $60. I'm thinking about replacing my Holley down the road and will definitely look at this option.

70sChevys · 11-14-2002, 01:09 PM

I tried the truck again when I got back home and it started fine....the bolts seem to work loose....maybe I should get lock washers for them...

Thanks for the link to the reman Edel's...we've got a speed shop down the street that has 'em as well...good thing to know.

ocbaud · 11-14-2002, 01:39 PM

speaking of new carbs...

every time i stomp on the gas when i'm already rolling, my carb cuts out for a second and then gets going. does it need rebuilt or something? i know its not getting caught up on anything, so thats not it

79BIG10 · 11-14-2002, 02:05 PM

Eric sounds like you need to get teh iar mixture set. It may be bogging it down in back 2 barrels when you get on it and it's dumping too much fuel for the engine until it sucks enough air to mix in with the added fuel. I bet Swervin can tell you exactly how to fix it on a Q-jet.

ocbaud · 11-14-2002, 02:43 PM

yippie

now i get to adjust my timing and carb

11-14-2002, 11:45 AM	#1
70sChevys Registered User Join Date: Sep 2002 Location: Dallas, TX Posts: 69	New Carb Time?? About a month ago, my truck started running rough when I started it up first thing in the morning...sounded like it wasn't getting gas, so I popped the hood and found the carb was leaking from the top and the front two bolts were loose. (It's a Q-jet)....this fixed it and I drove off. This morning it did the same thing and tightening the bolts didn't help....it wouldn't start. I'm going to try and prime it to start it and check the other bolts, but I'm wondering if there's anything else easy to replace that will solve the problem...if not I'm gonna get a 1406 Edelbrock for it. So for you carb guys....what can I check to fix it (I could really use the $250 elsewhere!). __________________ Kelly C. Hanna MMCC & Southern Bowties Club Hanna Woodworks Classic Chevy Country

11-14-2002, 12:52 PM	#2
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Sorry, I'm dumb when it comes to carbs. I've seen that Jegs sells rebuild Edelbrocks for $180. Here's the link. http://www.jegs.com/cgi-bin/ncommerc...13&prmenbr=361 It will save you about $60. I'm thinking about replacing my Holley down the road and will definitely look at this option. __________________ Scott Shelbourne

11-14-2002, 01:09 PM	#3
70sChevys Registered User Join Date: Sep 2002 Location: Dallas, TX Posts: 69	I tried the truck again when I got back home and it started fine....the bolts seem to work loose....maybe I should get lock washers for them... Thanks for the link to the reman Edel's...we've got a speed shop down the street that has 'em as well...good thing to know. __________________ Kelly C. Hanna MMCC & Southern Bowties Club Hanna Woodworks Classic Chevy Country

11-14-2002, 02:05 PM	#5
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Eric sounds like you need to get teh iar mixture set. It may be bogging it down in back 2 barrels when you get on it and it's dumping too much fuel for the engine until it sucks enough air to mix in with the added fuel. I bet Swervin can tell you exactly how to fix it on a Q-jet. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

11-14-2002, 01:39 PM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	speaking of new carbs... every time i stomp on the gas when i'm already rolling, my carb cuts out for a second and then gets going. does it need rebuilt or something? i know its not getting caught up on anything, so thats not it

11-14-2002, 02:43 PM	#6
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	yippie now i get to adjust my timing and carb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.